Manual

KINO-9453 Mini-ITX Motherboard
Page 97
 DMA Mode [Auto]
Use the DMA Mode BIOS selection to adjust the DMA mode options.

Auto DEFAULT
BIOS auto detects the DMA mode. Use this value if the IDE
disk drive support cannot be determined.

SWDMA0
Single Word DMA mode 0 selected with a maximum data
transfer rate of 2.1MBps

SWDMA1
Single Word DMA mode 1 selected with a maximum data
transfer rate of 4.2MBps

SWDMA2
Single Word DMA mode 2 selected with a maximum data
transfer rate of 8.3MBps

MWDMA0
Multi Word DMA mode 0 selected with a maximum data
transfer rate of 4.2MBps

MWDMA1
Multi Word DMA mode 1 selected with a maximum data
transfer rate of 13.3MBps

MWDMA2
Multi Word DMA mode 2 selected with a maximum data
transfer rate of 16.6MBps

UDMA1
Ultra DMA mode 0 selected with a maximum data transfer
rate of 16.6MBps

UDMA1
Ultra DMA mode 1 selected with a maximum data transfer
rate of 25MBps

UDMA2
Ultra DMA mode 2 selected with a maximum data transfer
rate of 33.3MBps

UDMA3
Ultra DMA mode 3 selected with a maximum data transfer
rate of 44MBps (To use this mode, it is required that an
80-conductor ATA cable is used.)