User guide

KINO-9453 Mini-ITX Motherboard
Page 71
JP9 Description
Open Normal Operation Default
Short Termination Resister Setting
Table 5-6: RS-485 Termination Resister Jumper Settings
The RS-422 or RS-485 Termination Resister jumper location is shown in Figure 5-11.
Figure 5-11: RS-422 and RS-485 Termination Resister Jumper Locations
5.4.5 LVDS Screen Resolution Selection
Jumper Label: JP2
Jumper Type:
8-pin header
Jumper Settings: See
Table 5-8
Jumper Location: See
Figure 5-13
The LVDS Screen Resolution Selection jumper allows the LVDS screen resolution to be
set. The LVDS Screen Resolution Selection jumper settings are shown in
Table 5-8.