IVCE-C608/IVCE-C604/IVCME-C604 Capture Card IEI Technology Corp. MODEL: IVCE-C608/IVCE-C604/IVCME-C604 Video Capture Card with PCIe/PCIe Mini Interface 8-Channel/4-Channel Input, RoHS Compliant User Manual Page 1 Rev. 1.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Revision Date Version Changes 6 February, 2012 1.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Table of Contents 1 INTRODUCTION........................................................................................................ 10 1.1 OVERVIEW.................................................................................................................11 1.1.1 Model Variations .............................................................................................. 12 1.1.2 Features ...............................................................
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 4.1.1.1 IVCE-C608 Switch (SW1) ......................................................................... 3 4.1.1.2 IVCE-C608 LED Screen (LED2) ............................................................... 3 4.1.1.3 IVCE-C608 LED Indicators (LED1) .......................................................... 3 4.1.1.4 IVCE-C608 Reset Input Connector (CN4) ................................................. 4 4.1.1.5 IVCE-C608 Reset Output Connector (CN5) .............
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 5.5.3 Video and Audio Input Connection .................................................................. 23 5.5.4 Install the GPIO Card (Optional) .................................................................... 25 6 SOFTWARE AND DRIVER....................................................................................... 26 6.1 OVERVIEW................................................................................................................ 27 6.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card List of Figures Figure 1-1: IVCE-C608/IVCE-C604/IVCME-C604 Capture Cards ..............................................11 Figure 1-2: IVCE-C608 Overview .................................................................................................13 Figure 1-3: IVCE-C604 Overview .................................................................................................14 Figure 1-4: IVCME-C604 Overview ...................................................
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Figure 6-11: Uninstall IEI Video Capture Test Suite (Start Menu)............................................33 Figure 6-12: Device Manager – Uninstall Driver ........................................................................34 Figure 6-13: IEI Video Capture Test Suite ..................................................................................35 Figure 6-14: Available Cards ...............................................................................
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card List of Tables Table 1-1: IVCE-C608/IVCE-C604/IVCME-C604 Video Capture Card Models..........................12 Table 2-1: Video Interfaces ..........................................................................................................17 Table 2-2: Video Processing........................................................................................................18 Table 2-3: Audio Processing .........................................................
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Chapter 1 1 Introduction Page 10
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 1.1 Overview Figure 1-1: IVCE-C608/IVCE-C604/IVCME-C604 Capture Cards The low power IVCE-C608/IVCE-C604/IVCME-C604 video capture cards are essential surveillance system components. The IVCE-C608/IVCE-C604/IVCME-C604 video capture cards are equipped with the high-performing Conexant video capture controllers with up to eight video and audio input channels.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 1.1.1 Model Variations There are three video capture card models with different connecting interfaces. These models are listed below: Model Name Interface Video Input Audio Input IVCE-C608 PCIe 8 channels 8 channels IVCE-C604 PCIe 4 channels 4 channels IVCME-C604 PCIe Mini 4 channels 4 channels Table 1-1: IVCE-C608/IVCE-C604/IVCME-C604 Video Capture Card Models 1.1.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 1.2 Overview Photo The IVCE-C608/IVCE-C604/IVCME-C604 video capture cards have a wide variety of peripheral interface connectors. The following sections give an overview of each model. 1.2.1 IVCE-C608 Overview The IVCE-C608 comes with one Conexant CX25853 video capture controller, two GPIO connectors, one rotary switch, LED indicators and one DB-26 video/audio connector.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 1.2.2 IVCE-C604 Overview The IVCE-C604 comes with one Conexant CX25850 video capture controller, one GPIO connector, one rotary switch, LED indicators and one DB-26 video/audio connector. A PCIe edge connector on the bottom of the capture card enables the IVCE-C604 to interface with a motherboard or CPU card. An overview can be seen in Figure 1-3: IVCE-C604 Overview.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 1.2.3 IVCME-C604 Overview The IVCME-C604 comes with one Conexant CX25854 video capture controller, one GPIO connector and one video/audio connector. The PCIe Mini interface of the capture card enables the IVCME-C604 to interface with a motherboard. An overview can be seen in Figure 1-4: IVCME-C604 Overview.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Chapter 2 2 Product Specifications Page 16
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 2.1 Specifications The following specifications are listed in the tables below: Table 2-1: Video Interfaces Table 2-2: Video Processing Table 2-3: Audio Processing Table 2-4: System Requirements Table 2-5: Mechanical and Environmental Specifications 2.1.1 Video Interfaces The following table lists detailed specifications for the interfaces on the three video capture cards.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 2.1.2 Video Processing The following table lists detailed specifications for the video processing features on the three video capture cards.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 2.1.3 Audio Processing The following table lists detailed specifications for the audio processing features on the three video capture cards. AUDIO PROCESSING IVCE-C608 IVCE-C604 IVCME-C604 Audio Compression Software compression Software compression Software compression 32 kHz 32 kHz Sampling rates (hardware 44.1 kHz 44.1 kHz spec.) 48 kHz 48 kHz 96 kHz 96 kHz 8 kHz 16 kHz 32 kHz 44.1 kHz 48 kHz Quantization (hardware 24-bit 24-bit 16-bit spec.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 2.1.5 Mechanical and Environmental Specifications The following table lists the dimensions, operating temperature and power consumption for each model. OTHERS IVCE-C608 IVCE-C604 IVCME-C604 Dimensions (mm) 111.00 x 102.40 111.23 x 102.39 50.92 x 30.00 -5ºC – 65ºC, -5ºC – 65ºC, -5ºC – 65ºC, non-condensing non-condensing non-condensing 5.3 W 3.51 W (3.3V @1.39 A, (3.3V @0.9 A, 12V @0.06 A) 12V @0.045 A) Operating Temperature 1.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 2.2 Dimensions The dimensions for each model are listed in Table 2-5: Mechanical and Environmental Specifications above. Detailed dimension drawings for each model are shown in the sections below. 2.2.1 IVCE-C608 Dimension Drawing The dimensions for the IVCE-C608 are listed below: Length: 111.0 mm Width: 102.4 mm The dimensions are shown in Figure 2-1: IVCE-C608 Dimension Drawing.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 2.2.2 IVCE-C604 Dimension Drawing The dimensions for the IVCE-C604 are listed below: Length: 111.23 mm Width: 102.39 mm The dimensions are shown in Figure 2-2: IVCE-C604 Dimension Drawing.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 2.2.3 IVCME-C604 Dimension Drawing The dimensions for the IVCME-C604 are listed below: Length: 50.92 mm Width: 30.00 mm The dimensions are shown in Figure 2-3: IVCME-C604 Dimension Drawing.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Chapter 3 3 Packing List Page 24
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 3.1 Anti-static Precautions WARNING: Static electricity can destroy certain electronics. Make sure to follow the ESD precautions to prevent damage to the product, and injury to the user. Make sure to adhere to the following guidelines: Wear an anti-static wristband: Wearing an anti-static wristband can prevent electrostatic discharge. Self-grounding: Touch a grounded conductor every few minutes to discharge any excess static buildup.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 3.3 Packing List NOTE: If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the IVCE-C608/IVCE-C604/IVCME-C604 was purchased from or contact an IEI sales representative directly by sending an email to sales@iei.com.tw.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Quantity Item and Part Number 1 Video input cable Image DB-9 to 4-channel BNC connector (IVCME-C604 only) 1 Audio input cable DB-9 to 4-channel RCA connector (IVCME-C604 only) 2 Reset cable (IVCE-C608 and IVCE-C604 only) 1 Utility CD 1 Quick installation guide Table 3-1: Packing List Page 27
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 3.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Chapter 4 4 Connectors and Jumpers Page 29
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 4.1 Video Capture Card Connector Diagrams The connector diagrams for both models are shown in the sections below: 4.1.1 IVCE-C608 Pinouts WARNING: The other connectors, jumpers and interfaces on the board not specified below are for R&D diagnostic purposes and should not be used by the end user.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Figure 4-1: IVCE-C608 Connectors and Pinouts (pin numbers in red) 4.1.1.1 IVCE-C608 Switch (SW1) Use the 16-position rotary switch (SW1) to set the ID for the board. Up to 16 IVCE-C608 can be installed in a single system. Each card must be allocated a unique ID. Switch ID settings are explained in more detail in Section 5.4.5. 4.1.1.2 IVCE-C608 LED Screen (LED2) The LED screen shows the ID number of the IVCE-C608.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Green: self-defined Red: self-defined 4.1.1.4 IVCE-C608 Reset Input Connector (CN4) Use the reset input connector (CN4) to connect to the reset button of the system chassis to enable the multiple card cascade reset function. Pinouts for the connector are shown in Table 4-2. Pin No. Signal 1 Reset input 2 GND Table 4-2: IVCE-C608 Reset Input Connector Pinouts 4.1.1.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 11 GND 12 GND 13 GND 14 GND 15 GND 16 GND 17 GND 18 Video Output 2 19 Audio In CH1 20 Audio In CH2 21 Audio In CH3 22 Audio In CH4 23 Audio In CH5 24 Audio In CH6 25 Audio In CH7 26 Audio In CH8 Table 4-4: IVCE-C608 Video/Audio Input Connector Pinouts Each IVCE-C608 can support up to eight video inputs, eight audio inputs and two video outputs .
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 4.1.2 IVCE-C604 Pinouts WARNING: The other connectors, jumpers and interfaces on the board not specified below are for R&D diagnostic purposes and should not be used by the end user.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Figure 4-2: IVCE-C604 Connectors and Pinouts (pin numbers in red) 4.1.2.1 IVCE-C604 Switch (SW1) Use the 16-position rotary switch (SW1) to set the ID for the board. Up to 16 IVCE-C604 can be installed in a single system. Each card must be allocated a unique ID. Switch ID settings are explained in more detail in Section 5.4.5. 4.1.2.2 IVCE-C604 LED Screen (LED2) The LED screen shows the ID number of the IVCE-C604.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Green: self-defined Red: self-defined 4.1.2.4 IVCE-C604 Reset Input Connector (CN4) Use the reset input connector (CN4) to connect to the reset button of the system chassis to enable the multiple card cascade reset function. Pinouts for the connector are shown in Table 4-7. Pin No. Signal 1 Reset input 2 GND Table 4-7: IVCE-C604 Reset Input Connector Pinouts 4.1.2.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 11 GND 12 GND 13 GND 14 GND 15 GND 16 GND 17 GND 18 Video Output 2 19 Audio In CH1 20 Audio In CH2 21 Audio In CH3 22 Audio In CH4 23 NC 24 NC 25 NC 26 NC Table 4-9: IVCE-C604 Video/Audio Input Connector Pinouts Each IVCE-C604 can support up to four video inputs, four audio inputs and two video outputs . If 16 systems are connected together, a total of 64 cameras can be strung together in a single system. 4.1.2.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 4.1.3 IVCME-C604 Pinouts WARNING: The other connectors, jumpers and interfaces on the board not specified below are for R&D diagnostic purposes and should not be used by the end user.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 4.1.3.1 IVCME-C604 Video/Audio Input Connector (CN1) Compatible cameras connect to the IVCME-C604 through the 10-pin wafer connector (via the D-SUB to BNC and RCA cables). Each IVCME-C604 can support up to four video inputs and four audio inputs. Pinouts for the connector are shown in Table 4-9. Pin No.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Chapter 5 5 Hardware Installation Page 12
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 5.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the IVCE-C608/IVCE-C604/IVCME-C604 may result in permanent damage to the IVCE-C608/IVCE-C604/IVCME-C604 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including susceptible the IVCE-C608/IVCE-C604/IVCME-C604. to ESD.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 5.2 Installation Considerations NOTE: The following installation notices and installation considerations should be read and understood before installation. All installation notices must be strictly adhered to. Failing to adhere to these precautions may lead to severe damage and injury to the person performing the installation.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Remove any of the stickers on the PCB board. These stickers are required for warranty validation. Use the product before verifying all the cables and power connectors are properly connected. Allow screws to come in contact with the PCB circuit, connector pins, or its components. 5.3 System Requirement Microsoft Windows XP Microsoft Windows 7 Microsoft DirectX 9.0c 5.4 IVCE-C608/IVCE-C604 Hardware Installation 5.4.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Step 2: Gently insert the video capture card into the PCIe slot. Step 3: Push down gently on the video card to make sure it is firmly inserted into the PCIe slot. Figure 5-1: IVCE-C608 and IVCE-C604 Installation Step 4: Insert a retention screw through the top of the video capture card external bracket into the chassis to secure the card to the chassis. Step 0: 5.4.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Step 4: Repeat Step 3 to connect multiple video capture cards in a system. Up to 16 cards can be added in a system. Step 5: Use a reset cable to connect the reset output connector on the last video card to the reset connector on the system motherboard. Step 0: Figure 5-2: Cascade Reset Connection 5.4.4 Install the GPIO Card (Optional) The IVCE-C608 and IVCE-C604 support 8-bit GPIO (4-bit input and 4-bit output) via an optional GPIO card.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Figure 5-3: GPIO Cable for IVCE-C608 and IVCE-C604 Step 3: Push the cable connector onto the video capture card GPIO connector making sure the pins are correctly aligned. Step 4: Next, connect the GPIO cable connector to the GPIO connector on the GPIO card (CN6).Step 0: 5.4.4.1 GPIO Card Pinouts The following diagram shows the pinouts of the two terminal blocks of the optional GPIO card.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 5.4.5 Set the Rotary Switch ID Settings Up to 16 IVC video cards can be installed simultaneously on a single system. However, to ensure the system is able to detect the different cards, each card must be assigned a unique ID. The unique ID is assigned using the 16-position rotary switch (0~F) on each IVC video card. The ID number of the video card will show on the LED screen. Figure 5-5: LED Screen and ID Rotary Switch NOTE: 1.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 5.4.6 Video and Audio Input Connection Both IVCE-C608 and IVCE-C604 are shipped with a video and audio input cable. To install the video and audio input cable, please follow the instructions below. NOTE: The IVCE-C608 is shipped with an 8-channel video and 8-channel audio input cable whereas the IVCE-C604 is shipped with a 4-channel video and 4-channel audio input cable.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Step 3: Connect the video input BNC connector (black) from the cable to a video device with the RG-59 coaxial cable (75 ohms). Step 4: Connect the audio input RCA connector (white) from the cable to an audio device. Step 5: Repeat Step 3 and Step 4 until all video and audio devices are connected. Step 0: NOTE: Up to eight video devices and eight audio devices can be connected to the IVCE-C608 video capture card.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Figure 5-7: Video Output Connection Step 1: Align and insert the DB-26 male connector from the cable to the DB-26 female connector on the board. Step 2: Make sure the connection is secure. Step 3: Connect the video output BNC connector (yellow) from the cable to a video device with the BNC cables. Step 4: Repeat Step 3 to connect the second video output device.Step 0: 5.5 IVCME-C604 Hardware Installation 5.5.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 5.5.2 Video Capture Card Installation To install the IVCME-C604, please refer to the diagram and instructions below. Figure 5-8: IVCME-C604 Installation Step 1: Insert into the socket at an angle. Line up the notch on the card with the notch on the connector. Slide the IVCME-C604 into the socket at an angle of about 20º. Step 2: Push down until the card clips into place. Push the other end of the card down until it clips into place on the plastic connector.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Figure 5-9: Video and Audio Input Connection (IVCME-C604) Step 1: Align and insert the wafer connector from the video/audio input cable to the 10-pin wafer connector (CN1) on the board. Step 2: Make sure the connection is secure. Step 3: Connect the 4-channel video input cable to the video connector of the video/audio input cable. Step 4: Connect the 4-channel audio input cable to the audio connector of the video/audio input cable.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 5.5.4 Install the GPIO Card (Optional) The IVCME-C604 supports 8-bit GPIO (4-bit input and 4-bit output) via an optional GPIO card. To install the GPIO card, please follow the instructions below. Step 1: Locate the GPIO connector on the IVCME-C604 video capture card (see Section 1.2.3). Step 2: Align the cable connector from the GPIO cable with the GPIO connector on the video capture card.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Chapter 6 6 Software and Driver Page 26
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 6.1 Overview A CD is shipped with the video capture card. The CD contains a driver for the Conexant video capture controllers on the card. When the video capture card is installed on the system, the driver must be installed. Failure to install the driver means the video capture card cannot be detected by the system. 6.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Figure 6-2: Driver Directory Icon Step 4: Double click the Driver Demo Application directory icon in Figure 6-2. Step 5: The driver folder appears. Choose a driver installation file (.exe) that matches the capture card model and the system OS. Double click the file to start the driver installation. For example, to install the IVCE-C604 driver in a Windows XP system, double click the IVCE-C6XX_Series_32Bit_V1.2.0_20111213.exe icon in the driver folder.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Step 6: The screen in Figure 6-3 appears. Select components to install. Click the + button to expand the card ID option list. Select the video capture card ID to install the driver. Click the INSTALL button in Figure 6-3 to continue the installation process. Figure 6-3: Driver Installation - Select Card ID Step 7: If the following window appears, click Continue Anyway.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Step 8: The driver starts to install and the screen in Figure 6-5 appears. Figure 6-5: Driver Installing Step 9: When the driver installation is complete, the screen in Figure 6-6 appears. Figure 6-6: Driver Installation Complete Step 10: Click CLOSE to finish. Restart the computer.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card have been properly installed (Figure 6-7). Figure 6-7: Device Manager Step 12: The IEI Video Capture Test Suite shortcut is shown on the desktop (Figure 6-8). The test suite can also be accessed from the following directory: C:\IEI\IVCE-C6XX Series. Figure 6-8: IEI Video Capture Test Suite Shortcut Icon 6.2.1 FFDShow Installation Step 1: Download the FFDShow video encoder from the Internet. Install the FFDShow in the system.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Step 2: Launch the “FFDShow video encoder configuration” from the start menu. Start menu Æ ffdshow Æ VFW configuration. Figure 6-9: FFDShow - VFW Configuration Step 3: The ffdshow video encoder configuration window appears. Select MJPEG encoder.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 6.2.2 Uninstall Driver and Application Step 1: To uninstall the test suite, select Uninstall in the “IVCE-C6XX Series” folder from the start-up menu (Figure 6-11). Figure 6-11: Uninstall IEI Video Capture Test Suite (Start Menu) Step 2: To uninstall the driver, right click the video capture card and select Uninstall in the Device Manager window as shown in Figure 6-11.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Figure 6-12: Device Manager – Uninstall Driver 6.3 IEI Video Capture Test Suite The IEI Video Capture Test Suite is a demonstration application for the IVCE-C608/IVCE-C604/IVCME-C604 video capture card. Before using the IEI Video Capture Test Suite, please complete the hardware installation and the software installation described in the previous sections. 6.3.1 Video Capture To use the IEI Video Capture Test Suite to capture video, follow the steps below.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Figure 6-13: IEI Video Capture Test Suite Step 2: Select the capture card type: PCIE or MiniPCIE. Step 3: Click the Get Cards button. The capture cards connected to the system shows. Select one capture card from the list. The card number is corresponding to the card ID shown on the card, which is selected by the rotary switch. Step 4: Configure the capture settings by clicking the Capture Settings button.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Figure 6-14: Available Cards Step 5: The Capture Settings window appears.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Step 6: Select a video standard (NTSC or PAL) and video resolutions. The supported resolutions of the two video standards are listed below. NTSC PAL 720x480 720x576 720x240 720x288 640x480 352x288 640x240 352x240 320x240 160x120 Table 6-1: Supported Resolutions Step 7: Select camera channel(s) to capture the video from. NOTE: If the IVCE-C608 or IVCE-C604 capture card is used, select camera1, 3, 5, 7, 9, 11, 13 or 15 (as shown below).
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Step 8: Select one audio channel (1~8) for preview, which mean the user can hear the sound from the selected audio channel when capturing video and audio. However, if the user chooses to record the captured video (see Step 11), all of the connected audio channels will be captured and saved in separate audio files (e.g., four audio files will be saved if four audio channels are connected).
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Figure 6-17: Recording File Path Selection Step 10: Click OK to save settings and exit the Capture Settings window. Step 11: In the main interface, check the Audio checkbox to capture audio. Check the Recording checkbox to record the video and save in AVI format (see Figure 6-28). Step 12: Click the RUN button to start capturing videos. Click the STOP button to stop.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Figure 6-19: Capturing Video 6.3.2 Video Bypass (IVCE-C608 and IVCE-C604 Only) To view the video input source on another display device in real time, please follow the steps below. Step 1: Connect the video input source to the video input port of the IVCE-C608 or the IVCE-C604. Step 2: Connect the BNC cable from the display device to the BNC output port of the IVCE-C608 or the IVCE-C60. Step 3: Launch the IEI Video Capture Test Suite.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Step 5: Click the Video Out button: Step 6: The Video Out window appears. Figure 6-20: Video Out Window Step 7: Select which channel to bypass. Once a channel is selected, it will start bypass the video to the display device. Click the Colour button to adjust the bypass video. (See Figure 6-21). Step 8: Click the Stop button to stop video bypass.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card NOTE: Audio bypass is not available in the current version. 6.3.3 Video Out (IVCE-C608 and IVCE-C604 Only) The Video Out function allows users to display video (recorded by the test suite) on display devices through the output ports of the IVCE-C608 or the IVCE-C604. To do this, follow the steps below. NOTE: Please make sure to stop the video by pass before using the video out function.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Step 7: Record a video clip first for video out. Select a standard (NTSC or PAL). Setup the duration. Specify a path to save the recorded files. Click the Record button to start recording. Figure 6-22: Video Out Window (Upper) WARNING: To ensure the video quality, it is highly recommended to save the recorded files in a drive which is not installed with an operating system.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Step 11: Click Run to start displaying the video through the output port. Figure 6-23: Video Out Window (Bottom) 6.3.4 Other Functions The IEI Video Capture Test Suite also includes some other functions, including Frame rate Color control GPIO control Watchdog timer General information These functions are described in the following sections.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 6.3.4.1 Frame Rate The user can view the frame rate when capturing video. Click the Framerate button to bring up the Frame Rate window. The frame rate of each camera channel show (refer to Figure 6-24).
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 6.3.4.2 Color Control Click the ColorControl button to bring up the Color Control window (Figure 6-25). Figure 6-25: Color Settings Use the Color Control settings to adjust the image properties of the displayed video of a single channel. Select the video channel to be adjusted by clicking the corresponding channel number (VDEC_A~H). The image properties include brightness, contrast, saturation, hue and sharpness.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 6.3.4.3 GPIO Click the GPIO button to bring up the GPIO control window (Figure 6-26). Figure 6-26: GPIO Control The GPIO function allows users to configure GPIO output signals and read GPIO input signal if the GPIO connector(s) of the IVCE-C608/IVCE-C604/IVCME-C604 is connected to an optional GPIO card.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 6.3.4.4 Watchdog Timer (WDT) To enable watchdog timer, click the WDT button to bring up the WDT window. Check Enable WDT and/or Toggle WDT options, then click OK. The amber LED on the capture card lights on indicating that the WDT is enabled. Figure 6-27: WDT Window To enable watchdog timer for multiple capture cards, check the checkboxes of the Enable WDT and/or Toggle WDT options on the test suite main interface (see Figure 6-28).
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 6.3.4.5 General Information Click the General button to bring up the General window. To view the general information (board ID and firmware version) of the capture card, click the Get Info button. Figure 6-29: General Window To test the LED function on the IVCE-C608 or the IVCE-C604, select the checkbox of the LEDs. Select Error, the red LED lights on. Select Ready, the green LED lights on.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Appendix A A Hazardous Materials Disclosure Page 50
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card A.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl Ethers (CR(VI)) (PBB) (PBDE) Housing X O O O O X Display X O O O O X Printed Circuit X O O O O X X O O O O O X O O O O X Fan Assembly X O O O O X Power Supply X O O O O X O O O O O O Board Metal Fasteners Cable Assembly Assemblies Battery
IVCE-C608/IVCE-C604/IVCME-C604 Capture Card 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签,此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件,像是电池或灯管,这些 元件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 X O O O O X 显示 X O O O O X 印刷电路板 X O O O O X 金属螺帽 X O O O O O 电缆组装 X O O O O X 风扇组装 X O O O O X 电力供应组装 X O O O O X 电池 O O O O O O O: 表示该有毒有害物质在该部件所有物质材料中的含量均在SJ/T113