Owner's manual

The driver program and operation of PM-1056-16P/PG and IVC-120/G are the same.

PM-1056-16P/PG is the interface of PC/104-PLUS.

The driver program and operation of PM-1056-4P/4PB/4PG/4PGB and IVC-100/G

are the same. PM-1056-4P/4PB/4PG/4PGB is the interface of PC/104-PLUS.

PCI Signal Grouping Selection

• SW1 (Rotary Switch): Group selection of PCI configuration for PC/104-PLUS

modules

Group SW1 Position

0 0, 4

1 1, 5

2 2, 6

3 3, 7

• Signal Grouping Description

Group PCICLK ID Address INT0 INT1 REQ GNT

0 PCICLK0 IDSEL0 INTA INTB REQ0 GNT0

1 PCICLK1 IDSEL1 INTB INTC REQ1 GNT1

2 PCICLK2 IDSEL2 INTC INTD REQ2 GNT2

3 PCICLK3 IDSEL3 INTD INTA REQ3* GNT3*

*Note: REQ3# and GNT#3 are not signals defined in PC/104-PLUS.

Do not use MODE3 if your card does not have these signals on PC/104-PLUS

connector.