Owner's manual

13
Specification for General Inputs
The general inputs can take DC voltage from 0-24V. Voltage above 24V is not
recommended.
Logic Voltage Range
0 < 0.5V
1 0.5V – 24V
Specification for General Outputs
Relay Contact Ratings
Contact Form 1 FORM C (SPDT)
Contact Capacity Coil = 0.36W
Resistive Load 1A/125 VAC
(cos θ = 1) 2A/24 VDC
Inductive Load 0.3A/30 VDC
(cos θ = 0.4 L/R = 7 msec)
Rated Carring Current 2A
Max allowable voltage AC 120V. DC 60V
Max allowable current 2A
Max allowable power 48W
Contact Material Ag Alloy
Common 1
Normal Open 1
Normal Close 1
Common 2
Normal Open 2
Normal Close 2
Common 3
Normal Open 3
Normal Close 3
Common 4
Normal Open 4
Normal Close 4
Output Connector
Figure 2