Owner manual

IOVU-751R-CE5/UX-R10 User Manual
Page 30
Three methods of mounting the IOVU-751R-CE5/UX-R10 are listed below.
 Wall mounting
 Panel mounting
 Arm mounting
The three mounting methods are described below.
4.3.1 Wall Mounting
To mount the IOVU-751R onto the wall, please follow the steps below.
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four screw holes in the bracket on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (
215H215HFigure 4-9).
Figure 4-9: Wall-mounting Bracket