Owner manual

IOVU-751R-CE5/UX-R10 User Manual
Page 23
PIN DESCRIPTION
1 6~30V DC Power in
2 GND
Table 4-2: 9~36V Power Connector Pinouts
Figure 4-2: Power Terminal Block
4.2.1.2 12V DC-In
Use the rear panel +6-30V DC jack to connect the monitor to a power source.
CN Label:
CN13
CN Type: 6-30V DC Jack
CN Pinouts:
See
208H208HTable 4-3
CN Location:
See
209H209HFigure 4-1
PIN DESCRIPTION
1 GND
2 GND
3 +6-30V
Table 4-3: DC 6-30V Connector Pinouts
4.2.2 Serial Interfaces
The system has both a RS-232 and a RS-232/422/485 serial port connector.
4.2.2.1 RS-232 Serial Interface Pinouts
Pinouts for the RS-232 serial port are shown below.