IOVU-751R-CE5/UX-R10 User Manual IOVU-751R-CE5/UX-R10 MODEL: IOVU-751R-CE5/UX-R10 Panel PC with 7" Touch Screen and 500 MHz RMI Alchemy™ Au1250™ Media Processor, PoE, Ethernet, USB, RS-232, RS-232/422/485, RoHS Compliant, IP 64 Protection User Manual Page i Rev. 1.
IOVU-751R-CE5/UX-R10 User Manual Revision Date Version Changes 20 September, 2012 1.02 Changed product photos Modified some specifications 30 July, 2009 1.01 Minor edit 9 January, 2009 1.
IOVU-751R-CE5/UX-R10 User Manual Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
IOVU-751R-CE5/UX-R10 User Manual Packing List NOTE: If any of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the IOVU-751R-CE5/UX-R10 from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@iei.com.tw. 0 The items listed below should all be included in the IOVU-751R-CE5/UX-R10 package.
IOVU-751R-CE5/UX-R10 User Manual Table of Contents 1 INTRODUCTION.......................................................................................................... 1 1H 9H 1.1 OVERVIEW.................................................................................................................. 2 1.1.1 Benefits............................................................................................................... 2 1.1.2 Features .........................................................
IOVU-751R-CE5/UX-R10 User Manual 4.2 EXTERNAL PERIPHERAL INTERFACE CONNECTORS ................................................... 21 4.2.1 DC Power interfaces........................................................................................ 22 4.2.1.1 6V~30V DC Terminal Block .................................................................... 22 4.2.1.2 12V DC-In................................................................................................. 23 4.2.2 Serial Interfaces ...............
IOVU-751R-CE5/UX-R10 User Manual ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY .......................................
IOVU-751R-CE5/UX-R10 User Manual List of Figures Figure 1-1: IOVU-751R-CE5/UX-R10..............................................................................................2 62H 160H Figure 2-1: Front Panel ..................................................................................................................7 63H 16H Figure 2-2: IOVU-751R-CE5/UX-R10 Peripheral Connectors......................................................
IOVU-751R-CE5/UX-R10 User Manual List of Tables Table 1-1: Technical Specifications..............................................................................................5 84H 182H Table 2-1: Technical Specifications............................................................................................12 85H 183H Table 2-2: IOVU-751R-CE5/UX-R10 LCD Specifications ...........................................................12 86H 184H Table 2-3: Touch Panel Specifications ..................
IOVU-751R-CE5/UX-R10 User Manual Chapter 1 1 Introduction Page 1
IOVU-751R-CE5/UX-R10 User Manual 1.1 Overview Figure 1-1: IOVU-751R-CE5/UX-R10 The IOVU series industrial CE touch-screen open offers both the reliability of a traditional and the flexibility of a PC. With an open, the user is able to run their own or third party software. Furthermore, the IOVU series is designed for use as a thin client device in a remote terminal environment. The IOVU series is powered by an open Windows CE .NET 5.
IOVU-751R-CE5/UX-R10 User Manual Offers increased functionality and flexibility over traditional s at a lower cost than industrial PCs. Enables users to configure the product for a particular application by accessing the operating system and scaling it to meet their needs. Rugged, compact, operates over wide temperature variations, and low power consumption embedded hardware design without failure-prone hard disk and fan.
IOVU-751R-CE5/UX-R10 User Manual One RS-232 serial communication connection One RS-232/422/485 serial communication connection Two 1.5 Watt speakers 7” color active matrix TFT display 4-wire resistive touch panel 6-30 VDC input Cool grey frame RoHS compliant 1.1.3 Technical Specifications The IOVU-751R-CE5/UX-R10 technical specifications are listed in Table 1-1.
IOVU-751R-CE5/UX-R10 User Manual SPECIFICATIONS 1 x RS-232 Serial Ports 1 x RS-232/422/485 USB Interfaces 2 x USB 2.0 host connectors Audio 2 x 1.5 Watt speakers POWER Power Supply 6-30 VDC Power Consumption 8.5 W ENVIRONMENTAL and MECHANICAL Minimum: -20ºC (-4°F) Operating Temperature Maximum: 60°C (140°F) 5%RH to 90%RH (non-condensing) Humidity Operating Random Vibration Mode 1.Axes: 3 axes (Vertical / Transverse / Longitudinal). Vibration 2.10-500 Hz, 60min/axis. 3.Equivalent to Z:2.
IOVU-751R-CE5/UX-R10 User Manual Chapter 2 2 Detailed Specifications Page 6
IOVU-751R-CE5/UX-R10 User Manual 2.1 Mechanical Overview 2.1.1 Front Panel The IOVU-751R-CE5/UX-R10 front panel (Figure 2-1) comprises a 7” TFT WVGA 16-bit 197H color touch screen LCD in an ABS+PC plastic frame. Figure 2-1: Front Panel 2.1.2 Connector Panel All external peripheral interface connectors are located on the bottom panel of the IOVU-751R-CE5/UX-R10 . The peripheral interface connectors are shown in Figure 2-2.
IOVU-751R-CE5/UX-R10 User Manual Figure 2-2: IOVU-751R-CE5/UX-R10 Peripheral Connectors External peripheral interface connectors on the IOVU-751R-CE5/UX-R10 include: 1 x DC-IN power socket 1 x DC-IN bare wire terminal block 1 x Power switch 2 x RJ-45 LAN connectors (one supports PoE) 1 x RS-232 connector 1 x RS-232/422/485 connector 2 x USB connectors 2.1.
IOVU-751R-CE5/UX-R10 User Manual Figure 2-3: IOVU-751R-CE5/UX-R10 Physical Dimensions (millimeters) 2.2 Internal Overview Internally the IOVU-751R-CE5/UX-R10 has a KAMIO-1252 embedded RISC (reduced instruction set computer) motherboard installed. An onboard Secure Digital card is also preinstalled onto the KAMIO-1252. Some of the specifications for the KAMIO-1252 are listed below. For more detailed information, please refer to the KAMIO-1252 user manual. 2.2.
IOVU-751R-CE5/UX-R10 User Manual Figure 2-4: KAMIO-1252 Overview [Front View] 2.2.1.
IOVU-751R-CE5/UX-R10 User Manual 1 x 10/100-BaseT Ethernet connector 1 x 10/100-BaseT Ethernet connector with PoE capability 1 x 12V DC-in power socket 1 x 6-30V DC-in bare wire terminal block 1 x RS-232 serial port connector 1 x RS-232/422/485 serial port connector 2 x USB port connectors 2.2.1.2 KAMIO-1252 Technical Specifications KAMIO-1252 technical specifications are listed below.
IOVU-751R-CE5/UX-R10 User Manual Specification Value Environmental -20ºC – 60ºC 5% - 85% relative humidity (non-condensing) IP64 compliant front panel Table 2-1: Technical Specifications 2.3 LCD Specifications The IOVU-751R-CE5/UX-R10 has a 7” WVGA LCD screen. The LCD screen is attached to an aluminum frame that is IP 64 compliant. The specifications are shown below. Model DATA IMAGE FG0700A2DSSWBG02 Size 7” Resolution 800 x 480 (WVGA) Active Area (mm) 152.4 x 91.44 Pixel Pitch (mm) 0.
IOVU-751R-CE5/UX-R10 User Manual Touch screen EELY-ECW Resolution Continuous Transmission > 80% S/W driver Windows CE 5.0 or Linux Keypad NO Table 2-3: Touch Panel Specifications 2.
IOVU-751R-CE5/UX-R10 User Manual 2.6 Power Supply WARNING: Whenever you need to remove a part for maintenance or upgrading, switch off the power supply and unplug the power cord first. The IOVU-751R-CE5/UX-R10 has a 12 V DC power input and a 6-30 V DC bare-wire connector on the bottom panel. The IOVU-751R-CE5/UX-R10 also supports Power over Ethernet (PoE) through one of its LAN ports.
IOVU-751R-CE5/UX-R10 User Manual Chapter 3 3 Unpacking Page 15
IOVU-751R-CE5/UX-R10 User Manual 3.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the IOVU-751R-CE5/UX-R10 may result in permanent damage to the IOVU-751R-CE5/UX-R10 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IOVU-751R-CE5/UX-R10. Dry climates are especially susceptible to ESD.
IOVU-751R-CE5/UX-R10 User Manual 3.3 Unpacking Checklist NOTE: If some of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the IOVU-751R-CE5/UX-R10 from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@iei.com.tw. 98H 3.3.
IOVU-751R-CE5/UX-R10 User Manual 3.4 Optional Items Part Number Description ALFPK-08 Panel mount kit AFLWK-07 VESA 75 wall mount kit ARM-11-RS LCD monitor/PPC arm kit, load capacity of 3kg~7kg STAND-A08-RS LCD monitor/PPC stand kit for VESA 75, up to 5kg VSTAND-A07 LCD monitor/PPC stand V type for VESA 75, 0~90 degree adjustable hinge and up to 2.
IOVU-751R-CE5/UX-R10 User Manual Part Number Description FLP-CDB01, AFLP-CDW01 VFD customer display (green) 5x7 dot Image matrix (black/white) 63000-FSP060DBAB1555-RS 24V DC 45W power adapter with bare wire, 90-264V AC input IPS-2042TX Industrial 6-port Lite-Managed P.O.E.
IOVU-751R-CE5/UX-R10 User Manual Chapter 4 4 Installation Page 20
IOVU-751R-CE5/UX-R10 User Manual 4.1 Installation Precautions When installing the IOVU-751R-CE5/UX-R10, please follow the precautions listed below: Read the user manual: The user manual provides a complete description of the IOVU-751R-CE5/UX-R10, installation instructions and configuration options. DANGER! Disconnect Power: Power to the IOVU-751R-CE5/UX-R10 must be disconnected during the installation process, or before any attempt is made to access the rear panel.
IOVU-751R-CE5/UX-R10 User Manual Connector Type 6-30V DC power jack DC Jack 6-30V DC bare wire power terminal Terminal Block Ethernet connectors RJ-45 Jack connector Power switch On/off switch RS-232 D-sub 9 Male connector RS-232/422/485 Serial connector D-sub 9 Male connector USB connectors Dual USB port Table 4-1: External Interface Connectors Figure 4-1: IOVU-751R-CE5/UX-R10 Peripheral Connectors 4.2.1 DC Power interfaces 4.2.1.
IOVU-751R-CE5/UX-R10 User Manual PIN DESCRIPTION 1 6~30V DC Power in 2 GND Table 4-2: 9~36V Power Connector Pinouts Figure 4-2: Power Terminal Block 4.2.1.2 12V DC-In Use the rear panel +6-30V DC jack to connect the monitor to a power source. CN Label: CN13 CN Type: 6-30V DC Jack CN Pinouts: See Table 4-3 CN Location: See Figure 4-1 208H 209H PIN DESCRIPTION 1 GND 2 GND 3 +6-30V Table 4-3: DC 6-30V Connector Pinouts 4.2.
IOVU-751R-CE5/UX-R10 User Manual Pin Arrangement Pin No Signal Name Direction Description 1 DCD Input Carrier Detect 2 RX Input Receive Data 3 TX Output Send Data 4 DTR Output Data Terminal Ready 5 GND N/A Ground 6 DSR Input Data Set Ready 7 RTS Output Request to Send 8 CTS Input Send Possible 9 RI Input Called Status Display Shell FG N/A Frame Ground (Common with SG) Table 4-4: RS-232 Pinouts 4.2.2.
IOVU-751R-CE5/UX-R10 User Manual Figure 4–3: Serial Port Pinouts To select RS-232, RS-422, or RS-485 mode, please follow the directions below. Step 1: Select "Start > Programs > IEI > IEI CEUTILITY.exe" to run IEI_CEUTILITY.exe in the “SYSTEM” folder on the SD/CF card). Figure 4-4: Serial Port Mode Setting Step 2: Change serial port mode setting. Change the value in Figure 4-4 to the 210H desired mode setting. Step 3: Click "Set" Step 4: Click "Save Registry" to save the changes.
IOVU-751R-CE5/UX-R10 User Manual 4.2.2.3 Connecting the Serial Port The IOVU-751R-CE5/UX-R10 has two female DB-9 connectors on the external peripheral interface panel for a serial device. Follow the steps below to connect a serial device to the IOVU-751R-CE5/UX-R10. Step 1: Insert the serial connector. Insert the DB-9 connector of a serial device into the DB-9 connector on the external peripheral interface. See Figure 4-5. 21H Figure 4-5: Serial Device Connector Step 2: Secure the connector.
IOVU-751R-CE5/UX-R10 User Manual PIN DESCRIPTION PIN DESCRIPTION 3 D1+ 7 D2+ 4 GND 8 GND Table 4-6: USB Connector Pinouts 4.2.3.2 USB Connection (Dual Connector) The external USB Series "A" receptacle connectors provide easier and quicker access to external USB devices. Follow the steps below to connect USB devices to the IOVU-751R-CE5/UX-R10. Step 1: Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into the USB Series "A" receptacle on the external peripheral interface.
IOVU-751R-CE5/UX-R10 User Manual 4.2.4.1 Ethernet Connector Pinouts The Ethernet connector pinouts are shown below. PIN DESCRIPTION 1 TPT+ 2 TPT- 3 TPR+ 4 LAN_GND 5 LAN_GND 6 TPR- 7 LAN_GND 8 LAN_GND Table 4-7: Ethernet Connector Pinouts Figure 4-7: Ethernet Connector The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green LED indicates activity on the port and the yellow LED indicates the port is linked (Table 213H 4-8).
IOVU-751R-CE5/UX-R10 User Manual 4.2.4.2 LAN Connection There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection to an external network. To connect a LAN cable with an RJ-45 connector, please follow the instructions below. Step 1: Align the connectors. Align the RJ-45 connector on the LAN cable with one of the RJ-45 connectors on the IOVU-751R-CE5/UX-R10. See Figure 4-8. 214H Figure 4-8: LAN Connection Step 2: Insert the LAN cable RJ-45 connector.
IOVU-751R-CE5/UX-R10 User Manual Three methods of mounting the IOVU-751R-CE5/UX-R10 are listed below. Wall mounting Panel mounting Arm mounting The three mounting methods are described below. 4.3.1 Wall Mounting To mount the IOVU-751R onto the wall, please follow the steps below. Step 1: Select the location on the wall for the wall-mounting bracket. Step 2: Carefully mark the locations of the four screw holes in the bracket on the wall.
IOVU-751R-CE5/UX-R10 User Manual Step 6: Insert the four monitor mounting screws provided in the wall mounting kit into the four screw holes on the real panel of the IOVU-751R and tighten until the screw shank is secured against the rear panel (Figure 4-10). 216H Step 7: Align the mounting screws on the monitor rear panel with the mounting holes on the bracket.
IOVU-751R-CE5/UX-R10 User Manual Step 9: Secure the panel PC by fastening the retention screw of the wall-mounting bracket. (Figure 4-11). 218H Figure 4-11: Secure the IOVU-751R 4.3.2 Panel Mounting The IOVU-751R-CE5/UX-R10 can be mounted in a panel. CAUTION: When mounting the IOVU-751R-CE5/UX-R10 take care to tighten the retention screws or bolts until fully secure, but do not over tighten. Over tightening the retention screws or bolts may cause them to become stripped, rendering them useless.
IOVU-751R-CE5/UX-R10 User Manual Step 2: Cut out a section from the panel that corresponds to the rear panel dimensions of the IOVU-751R-CE5/UX-R10. Take care that the panel section that is cut out is smaller than the overall size of the frame that surrounds the IOVU-751R but just large enough for the rear panel of the IOVU-751R to fit through (see Figure 219H 4-12).
IOVU-751R-CE5/UX-R10 User Manual Step 5: Tighten the screws that pass through the panel mounting clamps until the plastic caps at the front of all the screws are firmly secured to the panel (Figure 4-14). 20H Figure 4-14: Tighten the Panel Mounting Clamp Screws 4.3.3 Arm Mounting The IOVU-751R-CE5/UX-R10 is VESA (Video Electronics Standards Association) compliant and can be mounted on an arm with a 75 mm interface pad. To mount the IOVU-751R-CE5/UX-R10 on an arm, please follow the steps below.
IOVU-751R-CE5/UX-R10 User Manual Step 2: Once the mounting arm has been firmly attached to the surface, lift the IOVU-751R onto the interface pad of the mounting arm. Step 3: Align the retention screw holes on the mounting arm interface with those on theIOVU-751R, as shown in Figure 4-15. 21H Figure 4-15: Arm Mounting Retention Screw Holes Step 4: Secure the IOVU-751R to the interface pad by inserting four retention screws through the bottom of the mounting arm interface pad and into the IOVU-751R.
IOVU-751R-CE5/UX-R10 User Manual 4.3.4 Stand Mounting The IOVU-751R has Video Electronics Standards Association (VESA) standard mounting holes tapped into the rear panel. The monitor stand mounting plate has a matching VESA hole pattern. To mount the IOVU onto a stand, please follow the steps below. Step 1: Line up the threaded holes on the monitor rear panel with the screw holes on the monitor stand mounting plate.
IOVU-751R-CE5/UX-R10 User Manual IOVU-751R-CE5/-R10: Standard Windows® CE5.0 professional version license. Optional Board Support Package (BSP) for customers to customize their own OS image. Attached Software Development Kit (SDK) for embedded Visual C++ to program Windows CE application. Built-in .
IOVU-751R-CE5/UX-R10 User Manual Appendix A A Certifications Page 38
IOVU-751R-CE5/UX-R10 User Manual A.1 RoHS Compliant All models in the IOVU series comply with the Restriction of Hazardous Materials (RoHS) Directive. This means that all components used to build the industrial workstations and the workstation itself are RoHS compliant.
IOVU-751R-CE5/UX-R10 User Manual Appendix B B Safety Precautions Page 40
IOVU-751R-CE5/UX-R10 User Manual B.1 Safety Precautions WARNING: The precautions outlined in this appendix should be strictly followed. Failure to follow these precautions may result in permanent damage to the IOVU-751R-CE5/UX-R10. Please follow the safety precautions outlined in the sections that follow: B.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times.
IOVU-751R-CE5/UX-R10 User Manual B.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the IOVU-751R-CE5/UX-R10 may result in permanent damage to the IOVU-751R-CE5/UX-R10 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IOVU-751R-CE5/UX-R10. Dry climates are especially susceptible to ESD.
IOVU-751R-CE5/UX-R10 User Manual B.1.3 Product Disposal WARNING: Risk of explosion if battery is replaced by and incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations. Outside the European Union - If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority so as to comply with the correct disposal method.
IOVU-751R-CE5/UX-R10 User Manual Except for the LCD panel, never spray or squirt liquids directly onto any other components. To clean the LCD panel, gently wipe it with a piece of soft dry cloth or a slightly moistened cloth. The interior of the IOVU-751R-CE5/UX-R10 does not require cleaning. Keep fluids away from the IOVU-751R-CE5/UX-R10 interior. Be cautious of all small removable components when vacuuming the IOVU-751R-CE5/UX-R10.
IOVU-751R-CE5/UX-R10 User Manual Foam swabs - Whenever possible, it is best to use lint free swabs such as foam swabs for cleaning.
IOVU-751R-CE5/UX-R10 User Manual Appendix C C Hazardous Materials Disclosure Page 46
IOVU-751R-CE5/UX-R10 User Manual C.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
IOVU-751R-CE5/UX-R10 User Manual Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl (CR(VI)) (PBB) Ethers (PBDE) Housing X O O O O X Display X O O O O X Printed Circuit X O O O O X X O O O O O X O O O O X Fan Assembly X O O O O X Power Supply X O O O O X O O O O O O Board Metal Fasteners Cable Assembly Assemblies Battery O: This tox
IOVU-751R-CE5/UX-R10 User Manual 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯 (Pb) (Hg) (Cd) (CR(VI)) (PBB) 醚 (PBDE) 壳体 X O O O O X 显示 X O O O O X 印刷电路板 X O O O O X 金属螺帽 X O O O O O 电缆组装 X O O O O X 风扇组装 X O O O O X 电力供应组装 X O O O O X 电池 O O O O O O O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006
