User guide

IOVU-572M Panel PC
Page 29
the overall size of the frame that surrounds the IOVU-572M but just large
enough for the rear panel of the IOVU-572M to fit through (see
Figure 4-16).
Figure 4-16: IOVU-572M Panel Opening (mm)
Step 12: Slide the IOVU-572M through the hole until the frame is flush against the panel.
Step 13: Insert the panel mounting clamps into the pre-formed holes along the edges of
the chassis, behind the frame.
Figure 4-17: Panel Mounting Clamp
Step 14: Tighten the screws that pass through the panel mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the panel (
Figure 4-18).
Step 14: