User guide

IOVU-572M Panel PC
Page 26
4.4.1 Wall Mounting
To mount the IOVU-572M onto the wall, please follow the steps below.
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four screw holes in the bracket on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (
Figure 4-13).
Figure 4-13: Wall-mounting Bracket
Step 6: Insert the four monitor mounting screws provided in the wall mounting kit into the
four screw holes on the real panel of the IOVU-572M and tighten until the screw
shank is secured against the rear panel (
Figure 4-14).
Step 7: Align the mounting screws on the monitor rear panel with the mounting holes on
the bracket.