User's Manual

IOVU-210AD-RK39 Panel PC
Page 24
Figure 3-10: Arm Mounting
3.4.3 Stand Mounting
The IOVU-210AD-RK39 has Video Electronics Standards Association (VESA) standard
mounting holes tapped into the rear panel. The monitor stand mounting plate has a
matching VESA hole pattern. To mount the IOVU-210AD-RK39 onto a stand, please follow
the steps below.
Step 1: Line up the threaded holes on the system rear panel (Figure 3-9) with the screw
holes on the monitor stand mounting plate.
Step 2: Secure the system to the stand with the supplied retention screws (Figure 3-11).
Step 0: