User's Manual

IOVU-210AD-RK39 Panel PC
Page 20
Step 5: Secure the mounting-bracket to the wall by inserting four retention screws (M4*8)
into the four pilot holes and tightening them (Figure 3-6).
Figure 3-6: Wall-mounting Bracket
Step 6: Insert the four monitor mounting screws (M4*6) provided in the wall mounting kit
into the four screw holes on the real panel of the IOVU-210AD-RK39 and tighten
until the screw shank is secured against the rear panel (Figure 3-7).
Step 7: Align the mounting screws on the monitor rear panel with the mounting holes on
the bracket.
Step 8: Carefully insert the screws through the holes and gently pull the monitor
downwards until the monitor rests securely in the slotted holes (Figure 3-7).
Ensure that all four of the mounting screws fit snuggly into their respective
slotted holes.