User guide

IOPS-Q67/H61 Pluggable Module PC
Page 15
3.3 Pluggable Module Installation
To install the IOPS-Q67/H61 to an OPS compliant display, following the steps below.
Step 1: Align the IOPS-Q67/H61 pluggable module with the OPS slot of the display.
Step 2: Push the IOPS-Q67/H61 into the bottom (
Figure 3-3).
Figure 3-3: Pluggable Module Installation
Step 3: The lock areas on both side panels of the IOPS-Q67/H61 are automatically fixed
with the mechanical housing.
3.4 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
 Audio devices
 RJ-45 Ethernet cable connectors
 DisplayPort monitors
 Serial port devices (via RJ-45 to DB-9 cable)
 USB devices