Owner manual

IMBA-XQ354 Motherboard
Page 126

Disabled
HECI message disabled

Enabled DEFAULT
HECI message enabled
 End of Post S5 HECI Message [Enabled]
Use the End of Post S5 HECI Message option to enable or disable the Intel® AMT the
HECI message to wake the system in an S5 sleep state.

Disabled
HECI bus cannot rouse system from an S5 state

Enabled DEFAULT
HECI bus can rouse system from an S5 state
 ME-HECI [Enabled]
This option is not user configurable.
 ME-IDER [Enabled]
Use the ME-IDER option to enable or disable the IDE-Redirection (IDER) protocol. This
allows redirection of CD, floppy and DVD drives through the management engine.

Disabled
The IDER protocol is disabled

Enabled DEFAULT
The IDER protocol is enabled
 ME-KT [Enabled]
Use the ME-KT option to enable or disable the Serial Over LAN (SOL) protocol to enable
the Intel® AMT enabled to redirect the keyboard/text through the management engine.

Disabled
The SOL protocol is disabled

Enabled DEFAULT
The SOL protocol is enabled
6.3.9 Remote Access Configuration
Use the Remote Access Configuration menu (9BIOS Menu 15) to configure remote
access parameters. The Remote Access Configuration is an AMIBIOS feature and