Owner manual

IMBA-XQ354 Motherboard
Page 105
6.3.2 IDE Configuration
Use the IDE Configuration menu (9BIOS Menu 4) to change and/or set the configuration
of the IDE devices installed in the system.
BIOS Menu 4: IDE Configuration
 SATA#n Configuration [Enhanced]
Use the SATA#n BIOS option to enable the nth SATA drive port.

Enhanced DEFAULT
The nth SATA drive port is activated

Disabled
The nth SATA drive port is disabled
 Configure SATA#n as [IDE]
Use the Configure SATA#n as BIOS option to configure the nth SATA port as an IDE
drive, a SATA drive (AHCI mode) or a SATA drive in a RAID configuration.