Manual

IMBA-Q670 ATX Motherboard
Page 83
5.3.5 SATA Configuration
Use the SATA Configuration menu (BIOS Menu 8) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Controller(s) [Enabled]
SATA Mode [AHCI Mode]
Enable or disable SATA
device
---------------------
ÅÆ : Select Screen
↑ ↓: Select Item
Enter Select
+ - Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 8: SATA Configuration
Î SATA Controller(s) [Enabled]
Use the SATA Controller(s) option to enable or disable the SATA controller on the
system.
Î
Enabled DEFAULT
SATA controller enabled
Î
Disabled
SATA controller disabled
Î SATA Mode [AHCI Mode]
Use the SATA Mode option to configure SATA devices as normal IDE devices.
Î
IDE Mode
Configures SATA devices as normal IDE device.
Î
AHCI Mode DEFAULT
Configures SATA devices as AHCI device.
Î
RAID Mode
Configures SATA devices as RAID device.