User guide

IMBA-9454G Motherboard
Page 124
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
Configure Remote Access type and parameters

Remote Access [Disabled]
 Select Screen
  Select Item
+ - Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 12: Remote Access Configuration
 Remote Access [Disabled]
Use the Remote Access BIOS option to enable or disable access to the remote
functionalities of the system.


Disabled DEFAULT
Remote access is disabled.


Enabled
Remote access configuration options shown below
appear:
Serial Port Number
Serial Port Mode
Redirection after BIOS POST
Terminal Type
These configuration options are discussed below.
 Serial port number [COM1]
Use the Serial Port Number option to select the serial port used for remote access.


COM1 DEFAULT
System is remotely accessed through COM1


COM2 DEFAULT
System is remotely accessed through COM2