User guide

IMBA-9454G Motherboard
Page 91
Step 3: Connect the cable to the SATA disk. Connect the connector on the other end
of the cable to the connector at the back of the SATA drive. See Figure 5-16.
Step 4: Conn
ect the SATA power cable. Connect the SATA power connector to the
back of the SATA drive. See Figure 5-16. Step 0:
Figure 5-16: SATA Power Drive Connection
5.7 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
 Mouse and keyboard
 Parallel devices
 RJ-45 Ethernet cable connectors
 USB devices
 Audio devices
 VGA monitor
 Serial devices