User guide

IMBA-9454G Motherboard
Page 88
Quantity Type
1 ATA 66/100 flat cable
2 Dual RS-232 cables
2 SATA drive cables
1 SATA drive power cable
Table 5-6: IEI Provided Cables
5.6.2 ATA Flat Cable Connection
The ATA 66/100 flat cable connects to an IDE device. Follow the instructions below to
connect an IDE HDD to the IMBA-9454G.
Step 1: Locate the IDE connector. The locations of the IDE device connectors are
shown in Chapter 3.
Step 2: Insert the connector. Connect the IDE cable connector to the onboard
connector. See Figure 5-13. A key on the front of the cable co
nnector ensures it
can only be inserted in one direction.
Figure 5-13: IDE Cable Connection