User guide

IMBA-9454G Motherboard

Page 84

5.4.1 CF Master/Slave Selection

Jumper Label:

JP2

Jumper Type:

2-pin header

Jumper Settings:

See Table 5-2

The CF M

aster/Slave Selection jumper sets the CF Type I card or CF Type II cards as

either the slave device or the master device. CF Master/Slave Selection jumper settings

are shown in Table 5-2.

Pins Description

Open Slave Default

Short Master

Table 5-2: CF Master/Slave Selection Settings

Figure 5-9: Jumper Locations

5.4.2 Clear CMOS Jumper

Jumper Label:

JP1

Jumper Type:

3-pin header

Jumper Settings:

See Table 5-3

the IMBA-9454G fails to boot due to improper BIOS settings, the clear CMOS jumper

clears the CMOS data and resets the system BIOS information. To do this, use the jumper