User guide

IEM-945GSE ETX 3.0 Module
Page 25
Figure 4-2: Connector and Jumper Locations
4.1.2 Peripheral Interface Connectors
Table 4-1 shows a list of the interface connectors on the IEM-945GSE Detailed
descriptions of these connectors can be found in Section
4.2.
Connector Type Label
ETX connector ETX connector X1, X2, X3, X4
SATA connectors SATA connector CN1, CN2
SO-DIMM socket SO-DIMM socket CN3
SDVO connector Flat connector CN4
SPI programming connector 6-pin connector CN5
Table 4-1: IEM-945GSE Interface Connectors
4.2 ETX Interface Connectors
The IEM-945GSE embedded module has standard four standard ETX interface
connectors on the reverse side of the board. The location of the pins and the pinout
descriptions are given below.