Instruction Manual

IDS-H61 Digital Signage Player
Page 42
 SO-DIMM module
 mSATA module (see Section
82..5.2.1)
5.2.1 mSATA Replacement
The IDS-H61 is preinstalled with one mSATA module. To replace the mSATA module,
please refer to the diagram and instructions below.
Step 1: Remove the top cover by removing the four retention screws on both side panels
(two on each side). See
Figure 5-1.
Figure 5-1: System Cover Retention Screws
Step 2: Locate the mSATA module installed on the motherboard (
Figure 5-2).
Figure 5-2: mSATA Module Location