User's Manual

ICEFIRE-T10A Mobile Clinic Assistant
Page 73
 Temperature of Start [070]
WARNING:
CPU failure can result if this value is set too high
When the fan is off, it will only start when the temperature exceeds this setting.
 Minimum Value: 0°C
 Maximum Value: 100°C
 Temperature of Off [060]
WARNING:
CPU failure can result if this value is set too high
The fan will turn off if the temperature falls below this value.
 Minimum Value: 0°C
 Maximum Value: 100°C
 Start PWM [100]
This is the initial speed of the fan when it first starts spinning.
 PWM Minimum Mode: 0
 PWM Maximum Mode: 100
 Slope PWM [1 PWM]
A bigger value will increase the fan speed in big amounts. A smaller value will increase the
speed more gradually.
 0 PWM
 1 PWM
 2 PWM