User's Manual

ICEFIRE-T10A Mobile Clinic Assistant
Page 71
does not become available until a USB compatible operating system is fully booted with all
USB drivers loaded. When this option is enabled, any attached USB mouse or USB
keyboard can control the system even when there is no USB driver loaded onto the
system.

Enabled D EFAULT Legacy USB support enabled

Disabled Legacy USB support disabled

Auto Legacy USB support disabled if no USB devices are
connected
6.3.4 H/W Monitor
The H/W Monitor menu ( 436H516H BIOS Menu 6) shows the operating temperature, fan speeds and
system voltages.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
CPU Temperature :+66 C
Accuracy: 1. -5 ~ +10 degree around 100 degree.
2. -10 ~ +15 degree around 50 degree.
SYS Temperature :+55 C
System FAN1 Speed :5644 RPM
> System FAN1 Configuration
---------------------
 : Select Screen
↑ ↓: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC
Exit
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 6: Hardware Health Configuration
 PC Health Status
The following system parameters and values are shown. The system parameters that are
monitored are: