User's Manual

ICEFIRE-T10A Mobile Clinic Assistant
Page 69

Enabled Enables the use of hyper threading technology
6.3.2 SATA Configuration
Use the SATA Configuration menu ( 434H514H BIOS Menu 4) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Port0 FiD 1.8 SATA10 (31.9G
ATA Or IDE Configuration [Enhanced]
Configure SATA as [IDE]
(1) IDE Mode. (2) AHCI
Mode. (3) RAID Mode.
---------------------
 : Select Screen
↑ ↓: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 4: IDE Configuration
 ATA Or IDE Configurations [Ehanced]
Use the ATA Or IDE Configurations option to configure the ATA/IDE controller.

Disabled Disables the on-board ATA/IDE controller.

Enhanced D EFAULT Configures the on-board ATA/IDE controller to be in
Enhanced mode. In this mode, IDE channels and SATA
channels are separated. This mode supports up to 6
storage devices. Some legacy OS do not support this
mode.