User's Manual

ICEFIRE-T10A Mobile Clinic Assistant
Page 59
5.5 Programmable Buttons
As become more familiar with the ICEFIRE-T10A, the user may want to customize the
keys on the front panel. The user can configure the keys to launch the favorite program,
run a command or enter a key combination.
NOTE:
The buttons and function keys on the front panel are disabled when the
Control Center is launched by the user.
To configure the front panel buttons, follow the steps below:
Step 1: Launch the Control Center. In the Button Actions section, select the button you
want to configure the action.
Figure 5-6: Button Actions
Step 2: Take Wifi as an example. Click the wifi button.The button configuration window
appears ( 506H Figure 5-7). The button configuration window has two sections.
 Wifi
 Fn+Wifi (Function key and wifi key should be pressed together)