User's Manual

ICEFIRE-T10A Mobile Clinic Assistant
Page 33
NOTE:
Push the power button again to suspend the system or to resume from
the suspend mode. The solid green LED lights on when the system is
in suspend mode.
Push the power button for 2-3 seconds to shut down the system. The
green LED turns off.
3.7 Using RFID Reader
There is a RFID reader on the side panel (Figure 1-5). To enable the RFID reader, follow
the steps below.
Step 1: Push the RFID reader button on the top panel to turn on the RFID reader. The
blue LED on the button lights on.
Figure 3-23: RFID Reader On/Off Button
Step 2: Double click the IRFR-110 icon on the desktop.