User's Manual

ICEFIRE-T10A Mobile Clinic Assistant
Page 32
3.6 Power-up the System
The power cable connects the power adapter to the power outlet. The power adapter and
power cable are required for operation of the ICEFIRE-T10A.
Step 1: Connect the power adapter to the ICEFIRE-T10A.
Step 2: Connect the power cable to the included power adapter.
Step 3: Connect the power cable to the power outlet.
Figure 3-22: Power-up the System
Step 4: Push the power button for one second to boot up the system. The green LED on
the button turns on. Step 0: