User's Manual

ICEFIRE-T10A Mobile Clinic Assistant
Page 30
Figure 3-19: Serial Device Connector
Step 3: Secure the connector. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector. Step 0:
3.5.1.1 RS-232 Serial Port Pinouts
Following are the RS-232 serial port pinouts.
Pin Description Pin Description
1 DCD 6 DSR
2 RX 7 RTS
3 TX 8 CTS
4 DTR 9 RI
5 GND
Table 3-1: Serial Port Pinouts
Figure 3-20: Serial Port Pinouts