User's Manual

ICEFIRE-T10A Mobile Clinic Assistant
Page 20
Step 2: Connect the ICEFIRE-T10A with a power source through a power cable and the
power adapter.
Step 3: Turn on the ICEFIRE-T10A.
Step 4: The system starts to charge the battery packs. The battery capacity can be
checked via the capacity indicators on the battery ( 408H479H Figure 3-4) or via the
Windows 7 power management screen ( 480H Figure 3-5).
Figure 3-5: Windows 7 Power Management Screen
3.1.1.2 Through Optional Docking Station
To charge the battery packs through the optional docking station, follow the steps below.
Step 1: Insert the battery packs into the docking station as shown in 481H Figure 3-6.