User's Manual

ICEFIRE-T10A Mobile Clinic Assistant
Page 13
WARNING:
When installing the ICEFIRE-T10A, make sure to:
 Turn the power off: Chance of electrocution. Turn off the monitor
and unplug it from the power supply.
 Only let certified engineers change the hardware settings:
Incorrect settings can cause irreparable damage to the product.
 Take anti-static precautions: Electrostatic discharge can destroy
electrical components and injure the user. Users must ground
themselves using an anti-static wristband or similar device.
The installation steps below should be followed in order.
Step 1: Unpack the tablet PC
Step 2: Check all the required parts are included
Step 3: Install and charge the battery packs
Step 4: Connect peripheral devices to the side panels of the tablet PC
Step 5: Connect the power cable
Step 6: Configure the system Step 0:
2.1 Unpack the Tablet PC
To unpack the tablet PC, follow the steps below:
WARNING!
Only remove the protective plastic cover stuck to the front screen after
installation. The plastic layer protects the monitor surface during
installation process.
Step 1: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.