User's Manual

ICEFIRE-T10A Mobile Clinic Assistant
Page 5
There are several buttons and indicators on the front panel of the ICEFIRE-T10A as show
in the figure above. Following are descriptions of their functions:
 Buttons
o Wireless on/off button: to enable or disable Wi-Fi connection
o Bluetooth on/off button: to enable or disable Bluetooth connection
o SAS (Secure Attention Sequence) button: CTRL-ALT-DEL
o Camera shutter button: to take a picture
 Function Key
Press the function key and a key together at the same time to perform the
following functions:
o Function key + Wireless on/off button = Rotate the screen clockwise
o Function key + Bluetooth on/off button = F1. Default setting is to launch
Windows Help and Support.
o Function key + SAS button = F2. Default setting is to rename a file.
o Function key + Up = Brightness up
o Function key + Down = Brightness down
 Navigation Keypad
o Up, Down
o Right, Left
o Center (select or enter)
 LED Indicators
o Wireless LED: Green light blinking: Wi-Fi is enabled
o Bluetooth LED: Blue light shows Bluetooth is enabled
o Battery 1 status LED: Orange light shows the Battery 1 is being charged
o Battery 2 status LED: Orange light shows the Battery 2 is being charged