User's Manual

ICEFIRE-T10A Mobile Clinic Assistant
Page 110
Step 7: The recovery tool menu appears. ( 788H788H469H552H Figure B-25)
Figure B-25: Recovery Tool Menu
Step 8: Create a factory default image. Follow Step 2 ~ Step 12 described in
Section 789H789H470H553H B.2.5 to create a factory default image.
B.4 Recovery Tool Functions
After completing the initial setup procedures as described above, users can access the
recovery tool by pressing <F3> while booting up the system. The main menu of the
recovery tool is shown below.