Instruction Manual

ICECARE-07 Mobile Field Assistant
Page 53
NOTE:
The flash mode is not available when using the front camera.
4.7 RFID Reader
There is a RFID reader on the top panel (Figure 1-6). To use the RFID reader, follow the
steps below.
Step 1: Go to Settings > More…, and tap NFC to turn on the RFID function.
Step 2: On the application page, tap NFC Demo to open the RFID application.
Figure 4-22: RFID Application
Step 3: Use the RFID reader to read a RFID card, then the card number will be shown in
the TAG Information column (
Figure 4-23).