Instruction Manual

ICECARE-07 Mobile Field Assistant
Page 29
Step 4: When the ICECARE-07 is connected to a computer, the screen in Figure 3-18
should be displayed on the ICECARE-07. Tap Turn on USB storage to allow
the connected computer to recognize the ICECARE-07 and assign it a drive
letter. Then the user can transfer files between them.Step 0:
Figure 3-18: USB Mass Storage Screen
3.8.4 USB Device Connection
There is a USB 2.0 host connector located on the side panel of the ICECARE-07. To
connect a USB 2.0 or USB 1.1 device, please follow the instructions below.
Step 1: Locate the USB host connector. The location of the USB host connector is
shown in
44Figure 1-5.
Step 2: Align the connectors. Align the USB device connector with the connector on
the ICECARE-07. See figure below.