Instruction Manual

ICECARE-07 Mobile Field Assistant
Page 12
To unpack the ICECARE-07, follow the steps below:
WARNING!
Only remove the protective plastic cover stuck to the front screen after
installation. The plastic layer protects the monitor surface during
installation process.
Step 1: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 2: Open the box.
Step 3: Lift the ICECARE-07 out of the box.
Step 4: Remove both polystyrene ends, one from each side.
Step 5: Pull the plastic cover off the ICECARE-07.
Step 6: Make sure all the components listed in the packing list are present. Step 0:
The ICECARE-07 is shipped with the following components. If any of these items are
missing or damaged, contact the distributor or sales representative immediately.
Quantity Item Image
1 ICECARE-07
2 Battery pack
(P/N: 31603-000016-RS)
1 Power adapter
(P/N: 63040-290040-000-RS)