Owner's manual

ManualsBrandsIEI Integration ManualsComputersIBS-19A

IBS-19A Series Medical Panel PC

Page i

User Manual

IBS-19A Series

MODEL:

Rev. 1.00 – 9 October, 2012

Medical Panel PC with Intel® Core™ i7/i5/i3 Processor,

TFT LCD, Wireless LAN, Touch Screen,

RS-232/422/485 and RoHS

Summary of content (177 pages)

PAGE 1
IBS-19A Series Medical Panel PC MODEL: IBS-19A Series Medical Panel PC with Intel® Core™ i7/i5/i3 Processor, TFT LCD, Wireless LAN, Touch Screen, RS-232/422/485 and RoHS User Manual Page i Rev. 1.
PAGE 2
IBS-19A Series Medical Panel PC Revision Date Version Changes 9 October, 2012 1.
PAGE 3
IBS-19A Series Medical Panel PC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
PAGE 4
IBS-19A Series Medical Panel PC Table of Contents 1 INTRODUCTION........................................................................................................ 15 1.1 OVERVIEW................................................................................................................ 16 1.2 MODEL VARIATIONS ................................................................................................. 17 1.3 FEATURES ............................................................................
PAGE 5
IBS-19A Series Medical Panel PC 3.5.6 Power Button Connector.................................................................................. 41 3.5.7 RS-422/485 Serial Port .................................................................................... 41 3.5.8 RS-232 Serial Port ........................................................................................... 43 3.5.9 USB Connectors............................................................................................... 44 3.
PAGE 6
IBS-19A Series Medical Panel PC 6.3.1 ACPI Settings ................................................................................................... 69 6.3.2 CPU Configuration.......................................................................................... 70 6.3.3 SATA Configuration ......................................................................................... 72 6.3.4 USB Configuration........................................................................................... 73 6.3.
PAGE 7
IBS-19A Series Medical Panel PC A.2 MAINTENANCE AND CLEANING PRECAUTIONS ...................................................... 122 A.2.1 Maintenance and Cleaning............................................................................ 122 A.2.2 Cleaning Tools ............................................................................................... 122 A.3 FCC PRECAUTIONS ............................................................................................... 123 B BIOS OPTIONS .............
PAGE 8
IBS-19A Series Medical Panel PC D.7.2 urn on LED - multiple ..................................................................................... 21 D.7.3 LED Blink - 1 .................................................................................................. 23 D.7.4 LED Blink - 2 .................................................................................................. 24 E SECOND AUDIO OUTPUT/INPUT CONFIGURATION ..................................... 26 E.1 OVERVIEW .......................
PAGE 9
IBS-19A Series Medical Panel PC List of Figures Figure 1-1: IBS-19A Series Medical Panel PC............................................................................16 Figure 1-2: Front View ..................................................................................................................19 Figure 1-3: LED Indicators...........................................................................................................20 Figure 1-4: Function Key Locations ..............................
PAGE 10
IBS-19A Series Medical Panel PC Figure 3-22: Chassis Support Screws ........................................................................................51 Figure 3-23: Securing the Panel PC............................................................................................52 Figure 3-24: Remote Control .......................................................................................................52 Figure 4-1: OSD Control Keys .............................................................
PAGE 11
IBS-19A Series Medical Panel PC Figure 7-27: Choose Install Location....................................................................................... 107 Figure 7-28: Installing PenMount Universal Driver V2.1.0.263.............................................. 107 Figure 7-29: PenMount Universal Driver Update Complete .................................................. 108 Figure 7-30: Windows Control Panel .......................................................................................
PAGE 12
IBS-19A Series Medical Panel PC Figure D-20: Add Loop Start........................................................................................................14 Figure D-21: Add Loop End .........................................................................................................14 Figure E-1: Realtek HD Audio Manager Icon [Task Bar]...........................................................27 Figure E-2: Realtek HD Audio Manager (Windows 7) .................................................
PAGE 13
IBS-19A Series Medical Panel PC List of Tables Table 1-1: Model Variations .........................................................................................................17 Table 1-2: LED Indicators ............................................................................................................20 Table 1-3: Function Keys .............................................................................................................21 Table 1-4: System Specifications......................
PAGE 14
IBS-19A Series Medical Panel PC BIOS Menus BIOS Menu 1: Main .......................................................................................................................67 BIOS Menu 2: Advanced ..............................................................................................................69 BIOS Menu 3: ACPI Settings .......................................................................................................69 BIOS Menu 4: CPU Configuration .............................
PAGE 15
IBS-19A Series Medical Panel PC Chapter 1 1 Introduction Page 15
PAGE 16
IBS-19A Series Medical Panel PC 1.1 Overview Figure 1-1: IBS-19A Series Medical Panel PC The IBS-19A Series is an Intel® Core™ powered flat panel PC with a rich variety of functions and peripherals. All IBS-19A Series models are designed for easy and simplified integration into point-of-care (POC) applications. An Intel® Core™ i5/i3 processor coupled with the Intel® H61 chipset delivers optimal memory, graphics, and peripheral I/O support. The system comes with 2.
PAGE 17
IBS-19A Series Medical Panel PC 1.2 Model Variations The IBS-19A Series has 11 models. Each model is preinstalled with one 2GB DDR3 32G IBS-19A6P-i5/2G/ 32G G620T/2G/25G i3/2G/25G i5/2G/32G IBS-19A3D- G620T/2G/25G i3/2G/25G i5/2G/32G IBS-19A3L- G620T/2G/25G i3/2G/25G i5/2G/32G IBS-19A3S- IBS-19A3P-i5/2G/ SO-DIMM. The model variations are listed in the table below.
PAGE 18
IBS-19A Series Medical Panel PC 1.3 Features The IBS-19A Series features the following: Intel® Core™ i5/i3 or Pentium® processor Intel® H61 chipset 2.0 GB DDR3 SO-DIMM preinstalled 802.11 a/b/g/n wireless module LED dash light design Five USB 2.
PAGE 19
IBS-19A Series Medical Panel PC Ambient Light Sensor The ambient light sensor detects the brightness of ambient environment when the auto-dimming function is turned on. Remote Control Sensor The remote control sensor receive infrared signal from the remote control. Programmable Nursing Call Button The nursing call button is surrounded by red LED light and is programmable.
PAGE 20
IBS-19A Series Medical Panel PC Figure 1-3: LED Indicators The descriptions of each LED indicator are listed below. LED Indicator Description Power Solid Blue: Power on HDD HDD activity. Wi-Fi The Wi-Fi connection is enabled or disabled. Bluetooth The Bluetooth module is enabled or disabled. Controlled by the BIOS option (see Section 6.4.2). Telephone Blinking blue: incoming call. CPU Temperature Alert Blue: the CPU temperature is normal. Red: the CPU temperature is too high.
PAGE 21
IBS-19A Series Medical Panel PC Figure 1-4: Function Key Locations The following table describes the function of these function keys. Buttons Function Buttons Function Function LCD on/off Audio volume down Power on/off (Press for 4 seconds) Audio volume up Mute audio Brightness down Display OSD menu Brightness up Lock/Unlock OSD (Lock: press for 4 secs. Unlock: press for 7 secs.) Sleep Mode: After idling for 60 seconds, the function keys go into sleep mode.
PAGE 22
IBS-19A Series Medical Panel PC 1.4.3 Rear Panel The rear panel provides access to retention screw holes that support the wall mounting and the handset installation. A removable HDD and a set of I/O interfaces are also located on the rear panel. Refer to Figure 1-5. Figure 1-5: Rear View 1.4.4 I/O Interface Panel The I/O interface panels located on the rear and the bottom of the IBS-19A Series have the following I/O interface connectors: Rear Panel: o o o o o 1 x RS-422/485 connector 1 x USB 2.
PAGE 23
IBS-19A Series Medical Panel PC o o o o o o 1 x Audio mic-in connector 1 x Audio line-out connector 1 x 9 V ~ 28 V DC In connector 1 x Phone jack for handset 1 x AT/ATX power mode switch 1 x Reset button The external I/O interface connector panels are shown in Figure 1-6 and Figure 1-7.
PAGE 24
IBS-19A Series Medical Panel PC Figure 1-7: I/O Interface Connector Panel (Bottom) 1.4.5 Side Panels The two side panels of the IBS-19A Series contain LED dash lights and a slim DVD-RW drive protected by a plastic cover. See Figure 1-8.
PAGE 25
IBS-19A Series Medical Panel PC 1.5 Internal Overview The IBS-19A Series has the following components installed internally: Motherboard 2.0 GB 1333 MHz DDR3 SO-DIMM Wireless module Bluetooth module 320GB/250GB SATA HDD Slim DVD-RW drive 1.6 System Specifications The technical specifications for the IBS-19A Series systems are listed in Table 1-4. Specification IBS-19A Series CPU Intel® Pentium® G620T 2.2G CPU Intel® Core™ i3-2100T 2.5G CPU Intel® Core™ i5-2390T 2.
PAGE 26
IBS-19A Series Medical Panel PC Specification IBS-19A Series Gamma Table Grayscale Mode - DICOM GSDF Clear Base 6500K Grayscale Mode - DICOM GSDF Blue Base 9300K Color Mode - Gamma 2.2 6500K Color Mode - DICOM GSDF Clear Base 6500K Color Mode - Gamma 2.2 9300K Color Mode - DICOM GSDF Blue Base 9300K Remote Control Infrared remote control for OSD control LED Dash Light Upper: 26 x True color LED Left: 20 x True color LED Right: 20 x True color LED Watchdog Timer Software programmable supports 1 sec.
PAGE 27
IBS-19A Series Medical Panel PC Specification IBS-19A Series 2 x RJ-45 for GbE LAN 2 x USB 2.0 ports 1 x Audio mic-in connector 1 x Audio line-out connector 1 x Reset button 1 x AT/ATX power mode switch Front Panel I/O 2 x USB 2.
PAGE 28
IBS-19A Series Medical Panel PC 1.7 Dimensions The IBS-19A Series dimensions are shown in Figure 1-9 and listed below.
PAGE 29
IBS-19A Series Medical Panel PC Chapter 2 2 Unpacking Page 29
PAGE 30
IBS-19A Series Medical Panel PC 2.1 Unpacking To unpack the flat panel PC, follow the steps below: WARNING! The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the flat panel PC has been properly installed. This ensures the screen is protected during the installation process. Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the external (second) box. Step 2: Open the external (second) box.
PAGE 31
IBS-19A Series Medical Panel PC Quantity Item Image Standard 1 IBS-19A Series Medical Panel PC 1 Medical-grade power adapter 1 Power cord 1 Remote Control 1 Screw kit 1 User manual CD and driver CD Page 31
PAGE 32
IBS-19A Series Medical Panel PC Chapter 3 3 Installation Page 32
PAGE 33
IBS-19A Series Medical Panel PC 3.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the maintenance of the device may result in permanent damage to the device and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IBS-19A Series. Dry climates are especially susceptible to ESD.
PAGE 34
IBS-19A Series Medical Panel PC Anti-static Discharge: If a user open the rear panel of the flat panel PC, to configure the jumpers or plug in added peripheral devices, ground themselves first and wear and anti-static wristband. 3.3 Installation and Configuration Steps The following installation steps must be followed. Step 1: Install the handset (optional) Step 2: Connect peripheral devices to the bottom panel of the flat panel PC Step 3: Mount the flat panel PC 3.
PAGE 35
IBS-19A Series Medical Panel PC Step 3: Plug the handset cord into the phone jack on the bottom panel (Figure 3-2). Figure 3-2: Handset Connection Step 4: Place the handset in the base (Figure 3-3).
PAGE 36
IBS-19A Series Medical Panel PC 3.5 I/O Panel Connectors The bottom panel and rear panel of the IBS-19A Series contain I/O connectors, switches and a reset button. These connector locations can be found in Section 1.4.4. Detailed descriptions of the connectors and cabling can be found in the subsections below. 3.5.1 Access the Bottom I/O Interface The I/O interface on the bottom panel is protected by a plastic cover. To access the I/O interface, follow the steps below to open the cover.
PAGE 37
IBS-19A Series Medical Panel PC Figure 3-5: Open the I/O Cover 3.5.2 Audio Connectors The audio jacks connect to external audio devices. Microphone (Pink): Connects a microphone. Line Out port (Green): Connects to a headphone or a speaker. With multi-channel configurations, this port can also connect to front speakers. 3.5.3 HDMI Connector The HDMI connector can connect to an HDMI device. The pinouts of the HDMI connector are shown below.
PAGE 38
IBS-19A Series Medical Panel PC Pin Description Pin Description 11 GND 12 HDMI_CLK# 13 N/C 14 N/C 15 HDMI_SCL 16 HDMI_SDATA 17 GND 18 +5V 19 HDMI_HPD 20 HDMI_GND 21 HDMI_GND 22 HDMI_GND 23 HDMI_GND Table 3-1: HDMI Connector Pinouts Figure 3-6: HDMI Connector To connect the HDMI cable to the IBS-19A Series, follow the steps below. Step 1: Locate the HDMI connector. The location is shown in Section 1.4.4. Step 2: Align the connector. Align the HDMI connector with the HDMI port.
PAGE 39
IBS-19A Series Medical Panel PC Step 3: Insert the HDMI connector. Gently insert the HDMI connector. The connector should engage with a gentle push. If the connector does not insert easily, check again that the connector is aligned correctly, and that the connector is being inserted with the right way up. 3.5.4 LAN Connectors The LAN connector allows connection to an external network. The pinouts of the RJ-45 LAN connector are shown below.
PAGE 40
IBS-19A Series Medical Panel PC LED Description LED Description A on: linked B off: 10 Mb/s blinking: data is being sent/received green: 100 Mb/s orange: 1000 Mb/s Table 3-3: RJ-45 Ethernet Connector LEDs To connect the IBS-19A Series to a network through the RJ-45 LAN connector, follow the steps below. Step 1: Locate the RJ-45 connector. The location of the RJ-45 connectors is shown in Section 1.4.4. Step 2: Align the connectors.
PAGE 41
IBS-19A Series Medical Panel PC 3.5.5 Power Input Connector The power connector connects to the 9 V ~ 28 V DC power adapter. Figure 3-10: Power Connector Pinouts 3.5.6 Power Button Connector The power button connector provides users an option to connect to an external power button to control system power. However, the user can easily turn the system power on or off by pressing the function buttons ( ) on the front panel (see Section 1.4.2.2). Figure 3-11: Power Button Connector Pinouts 3.5.
PAGE 42
IBS-19A Series Medical Panel PC Pin Description Pin Description 1 RS-422 TX+ 3 RS-422 RX+ (RS-485 D+) 2 RS-422 TX- 4 RS-422 RX- (RS-485 D-) Table 3-4: RS-422/485 Serial Port Pinouts To install the RS-422/485 devices, follow the steps below. Step 1: Locate the RS-422/RS485 connector. The location of the RS-422/RS-485 connector is shown in Section 1.4.4. Step 2: Connect the RS-422/485 connector to the RS-422/485 cable. Step 3: Insert the serial connector.
PAGE 43
IBS-19A Series Medical Panel PC Pin RS-422 RS-485 5 -- -- 6 -- -- 7 -- -- 8 -- -- 9 -- -- Table 3-5: DB-9 RS-422/485 Serial Port Pinouts 3.5.8 RS-232 Serial Port A RS-232 serial port device can be connected to the DB-9 RS-232 serial port on the bottom panel. The pinouts of the DB-9 RS-232 serial port is shown below. Figure 3-14: DB-9 RS-232 Serial Port Pin Description Pin Description 1 NDCD1 6 NDSR1 2 NRXD1 7 NRTS1 3. NTX1 8 NCTS1 4.
PAGE 44
IBS-19A Series Medical Panel PC Step 2: Insert the serial connector. Insert the DB-9 connector of a serial device into the DB-9 connector on the bottom panel. See Figure 3-15. Figure 3-15: Serial Device Connector Step 3: Secure the connector. Secure the serial device connector to the external interface by tightening the two retention screws on either side of the connector. 3.5.9 USB Connectors The USB ports are for attaching USB peripheral devices to the system. The pinouts of the USB port is shown below.
PAGE 45
IBS-19A Series Medical Panel PC Step 1: Located the USB connectors. The locations of the USB connectors are shown in Section 1.4.4. Step 2: Align the connectors. Align the USB device connector with one of the connectors on the bottom panel. See Figure 3-16. Figure 3-16: USB Device Connection Step 3: Insert the device connector. Once aligned, gently insert the USB device connector into the onboard connector. 3.6 AT/ATX Mode Selection AT and ATX power modes can both be used on the IBS-19A Series.
PAGE 46
IBS-19A Series Medical Panel PC Figure 3-17: AT/ATX Switch Location Step 2: Adjust the switch according to the preferred setting. 3.6.1 AT Power Mode With the AT mode selected, the power is controlled by a central power unit rather than a power switch. The IBS-19A Series panel PC turns on automatically when the power is connected. 3.6.2 ATX Power Mode With the ATX mode selected, the IBS-19A Series panel PC goes in a standby mode when it is turned off.
PAGE 47
IBS-19A Series Medical Panel PC 3.7.1 Arm Mounting The IBS-19A Series is VESA (Video Electronics Standards Association) compliant and can be mounted on an arm with a 100 mm interface pad. To mount the IBS-19A Series on an arm, please follow the steps below. Step 1: The arm is a separately purchased item. Please correctly mount the arm onto the surface it uses as a base. To do this, refer to the installation documentation that came with the mounting arm.
PAGE 48
IBS-19A Series Medical Panel PC Figure 3-18: Arm Mount Retention Screw Holes Step 4: Secure the IBS-19A Series to the interface pad by inserting four retention screws through the mounting arm interface pad and into the IBS-19A Series.
PAGE 49
IBS-19A Series Medical Panel PC 3.7.2 Stand Mounting To mount the IBS-19A Series using the stand mounting kit, please follow the steps below. Step 1: Locate the screw holes on the rear of the IBS-19A Series. This is where the bracket will be attached. Step 2: Align the bracket with the screw holes. Step 3: To secure the bracket to the IBS-19A Series insert the retention screws into the screw holes and tighten them.Step3: Figure 3-20: Stand Mounting 3.7.
PAGE 50
IBS-19A Series Medical Panel PC Step 7: Align the wall-mounting bracket screw holes with the pilot holes. Step 8: Secure the mounting-bracket to the wall by inserting the retention screws into the four pilot holes and tightening them (Figure 3-21).
PAGE 51
IBS-19A Series Medical Panel PC Figure 3-22: Chassis Support Screws Step 12: Secure the panel PC by fastening the retention screw of the wall-mounting bracket. (Figure 3-23).
PAGE 52
IBS-19A Series Medical Panel PC Figure 3-23: Securing the Panel PC 3.8 Remote Control The IBS-19A Series comes with a remote control for easy configuration. Figure 3-24 6 shows the remote control and its function keys.
PAGE 53
IBS-19A Series Medical Panel PC System On/Off: Press this button to turn the IBS-19A Series on or off. LCD On/Off. Press this button to turn the LCD monitor on or off. Auto-Dimming. Press this button to turn the auto-dimming function on or off. Brightness. Use these control buttons to adjust the brightness of the LCD screen. Volume. Press these buttons to adjust the audio volume level.
PAGE 54
IBS-19A Series Medical Panel PC Chapter 4 4 OSD Controls Page 54
PAGE 55
IBS-19A Series Medical Panel PC 4.1 User Mode OSD Structure 4.1.1 OSD Control Keys The on-screen-display (OSD) is controlled by two of the function keys on the front panel – left key and right key. See Figure 4-1. Figure 4-1: OSD Control Keys The following table describes the function of these two OSD control keys. Buttons Function Press these two keys at the same time to: 1. Open the OSD window. 2. Confirm the selection of the item inside a menu. 3. Confirm the function adjustment.
PAGE 56
IBS-19A Series Medical Panel PC 4.1.2 OSD Menu Structure Table 4-2 shows the OSD menu structure for all models of the IBS-19A Series. Level 0 Level 1 Value Main Display Features Menu Brightness 0 to 100 Contrast 0 to 100 Clock 0 to 100 Phase 0 to 100 H. Position 0 to 100 V.
PAGE 57
IBS-19A Series Medical Panel PC 4.2 Using the OSD OSD menu options are described below. 4.2.1 Main Display Features Main display features are shown in Figure 4-2. Figure 4-2: Main Display Features The brightness option adjusts the brightness of screen. This function Brightness adjusts the offset value of ADC. Setting this value too high or too low will affect the quality of image. When the auto- dimming function is turned on, the brightness control is not effective.
PAGE 58
IBS-19A Series Medical Panel PC 4.2.2 Color Color options are shown in Figure 4-3. Figure 4-3: Color Options The Color menu fine-tunes the palette of color hues for the LCD. User This item allows fine-tuning the balance among Red, Green, and Blue color hues if images look garish or unrealistic. 4.2.3 OSD Configurations The OSD configurations are shown in Figure 4-4.
PAGE 59
IBS-19A Series Medical Panel PC Figure 4-4: OSD Configurations Menu OSD Configurations are described below. OSD Time Out Determines how many seconds the OSD screen stays on screen before it disappears when OSD is left unattended. Adjusts the OSD position on the screen. Position 1 is in the upper left OSD Position of the screen, position 2 in the upper right, position 3 in the center, position 4 in the bottom left and position 5 in the bottom right.
PAGE 60
IBS-19A Series Medical Panel PC Chapter 5 5 System Maintenance Page 60
PAGE 61
IBS-19A Series Medical Panel PC 5.1 System Maintenance Introduction A user cannot replace the motherboard, memory modules or other internal components. If the internal components fail, it must be shipped back to PACSmate to be replaced. If the internal system components have failed, please contact the system vendor, reseller or a PACSmate sales person directly. If the HDD of the IBS-19A Series fail, it must be replaced. The HDD replacement instructions are described below. 5.
PAGE 62
IBS-19A Series Medical Panel PC 5.3 Turn off the Power WARNING: Failing to turn off the system before opening it can cause permanent damage to the system and serious or fatal injury to the user. Before any maintenance procedures are carried out on the system, make sure the system is turned off. 5.4 HDD Replacement The IBS-19A Series is preinstalled with one HDD. To replace the HDD, follow the instructions below. Step 1: Follow all anti-static procedures. See Section 5.2. Step 2: Turn off the power.
PAGE 63
IBS-19A Series Medical Panel PC Step 4: Remove the old HDD from the HDD slot (Figure 5-2). Figure 5-2: HDD Removal Step 5: Line up the new HDD with the SATA connector. Step 6: Insert the HDD into SATA connector until it is securely in place. Step 7: Replace the HDD cover and secure using one (1) retention screw.
PAGE 64
IBS-19A Series Medical Panel PC Chapter 6 6 BIOS Setup Page 64
PAGE 65
IBS-19A Series Medical Panel PC 6.1 Introduction A licensed copy of the BIOS is preprogrammed into the ROM BIOS. The BIOS setup program allows users to modify the basic system configuration. This chapter describes how to access the BIOS setup program and the configuration options that may be changed. 6.1.1 Starting Setup The UEFI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways. 1. Press the DELETE or F2 key as soon as the system is turned on or 2.
PAGE 66
IBS-19A Series Medical Panel PC F1 key General help, only for Status Page Setup Menu and Option Page Setup Menu F2 key Load previous values F3 key Load optimized defaults F4 key Save changes and Exit BIOS Table 6-1: BIOS Navigation Keys 6.1.3 Getting Help When F1 is pressed a small help window describing the appropriate keys to use and the possible selections for the highlighted item appears. To exit the Help Window press ESC or the F1 key again. 6.1.
PAGE 67
IBS-19A Series Medical Panel PC 6.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. 6 The Main menu gives an overview of the basic system information. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit BIOS Information BIOS Vendor Core Version Compliency Project Version Build Date and Time American Megatrends 4.6.4.0 0.15 UEFI 2.1 E396AT12.ROM 08/22/2012 16:14:47 Set the Date.
PAGE 68
IBS-19A Series Medical Panel PC System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds. 6.3 Advanced Use the Advanced menu (BIOS Menu 2) to configure the CPU and peripheral devices 6 through the following sub-menus: WARNING: Setting the wrong values in the sections below may cause the system to malfunction. Make sure that the settings made are compatible with the hardware.
PAGE 69
IBS-19A Series Medical Panel PC Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit > > > > > > > ACPI Settings CPU Configuration SATA Configuration USB Configuration Super IO Configuration H/M Monitor Serial Port Console Redirection System ACPI Parameters ---------------------- ÅÆ: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.10.
PAGE 70
IBS-19A Series Medical Panel PC ACPI Sleep State [S1 (CPU Stop Clock)] Use the ACPI Sleep State option to specify the sleep state the system enters when it is not being used. Î S1 (CPU Stop DEFAULT The system enters S1 (POS) sleep state. The system appears off. The CPU is stopped; RAM is Clock) refreshed; the system is running in a low power mode. Î S3 (Suspend to RAM) The caches are flushed and the CPU is powered off. Power to the RAM is maintained.
PAGE 71
IBS-19A Series Medical Panel PC Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced CPU Configuration Intel(R) Core(TM) i5-2390T CPU @ Processor Stepping Microcode Revision Max Processor Speed Min Processor Speed Processor Speed Processor Cores Intel HT Technology EMT64 Hyper-threading Intel Virtualization Technology 2.
PAGE 72
IBS-19A Series Medical Panel PC Î Disabled Î Enabled Disables the use of hyper threading technology DEFAULT Enables the use of hyper threading technology Intel® Virtualization Technology [Disabled] Use the Intel® Virtualization Technology option to enable or disable virtualization on the system. When combined with third party software, Intel Virtualization technology allows several OSs to run on the same system at the same time.
PAGE 73
IBS-19A Series Medical Panel PC Î IDE Î AHCI Configures SATA devices as normal IDE device. DEFAULT Configures SATA devices as AHCI device. 6.3.4 USB Configuration Use the USB Configuration menu (BIOS Menu 6) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced USB Configuration USB Devices: 1 Keyboard, 2 Hubs Legacy USB Support [Enabled] Enable Legacy USB Support.
PAGE 74
IBS-19A Series Medical Panel PC Î Enabled Î Disabled Legacy USB support disabled Î Auto Legacy USB support disabled if no USB devices are DEFAULT Legacy USB support enabled connected 6.3.5 Super IO Configuration Use the Super IO Configuration menu (BIOS Menu 7) to set or change the configurations for the FDD controllers, parallel ports and serial ports. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
PAGE 75
IBS-19A Series Medical Panel PC 6.3.5.1 Serial Port n Configuration Use the Serial Port n Configuration menu (BIOS Menu 8) to configure the serial port n. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced Serial Port 1 Configuration Serial Port Device Settings Enable or Disable Serial Port (COM) [Enabled] IO=3F8h; IRQ=4 --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 76
IBS-19A Series Medical Panel PC Î Î Î Î IO=3F8h; Serial Port I/O port address is 3F8h and the interrupt IRQ=3, 4 address is IRQ3, 4 IO=2F8h; Serial Port I/O port address is 2F8h and the interrupt IRQ=3, 4 address is IRQ3, 4 IO=3E8h; Serial Port I/O port address is 3E8h and the interrupt IRQ=3, 4 address is IRQ3, 4 IO=2E8h; Serial Port I/O port address is 2E8h and the interrupt IRQ=3, 4 address is IRQ3, 4 6.3.5.1.
PAGE 77
IBS-19A Series Medical Panel PC Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced PC Health Status CPU Temperature :+56 C Accuracy: 1.-5 ~ +10 degree around 100 degree. 2.-10 ~ +15 degree around 50 degree. K-Type1 Temperature : N/A K-Type2 Temperature : N/A System Temperature : +34 C CPU FAN Speed : 2347 RPM VCC3C : +3.264 V +Vcc_core : +1.080 V +V5S : +4.800 V +V12S : +11.968 V +1.5V : +1.088 V VSB3V : +3.280 V VBAT : +3.200 V 5VSB : +5.
PAGE 78
IBS-19A Series Medical Panel PC 6.3.7 Serial Port Console Redirection The Serial Port Console Redirection menu (BIOS Menu 10) allows the console redirection options to be configured. Console redirection allows users to maintain a system remotely by re-directing keyboard input and text output through the serial port. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced COM1 Console Redirection > Console Redirection Settings [Disabled] Console Redirection Enable or Disable.
PAGE 79
IBS-19A Series Medical Panel PC 6.4 Chipset Use the Chipset menu (BIOS Menu 11) to access the Northbridge and Southbridge configuration menus WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
PAGE 80
IBS-19A Series Medical Panel PC 6.4.1 Northbridge Configuration Use the Northbridge Configuration menu (BIOS Menu 12) to configure the Northbridge chipset. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Chipset NorthBridge Configuration Memory Information Memory Frequency Total Memory DIMM#1 DIMM#2 Check to enable VT-d function on MCH.
PAGE 81
IBS-19A Series Medical Panel PC Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced Graphics Configuration DVMT Pre-Allocated DVMT Total Gfx Mem [64M] [MAX] Primary IGFX Boot Display [VBIOS Default] Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device. --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt. F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save ESC Exit Version 2.10.1208.
PAGE 82
IBS-19A Series Medical Panel PC Primary IGFX Boot Display [VBIOS Default] Use the Primary IGFX Boot Display option to select the display device used by the system when it boots. Configuration options are listed below. VBIOS Default HDMI LVDS Default 6.4.2 Southbridge Configuration Use the Southbridge Configuration menu (BIOS Menu 14) to configure the Southbridge chipset. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
PAGE 83
IBS-19A Series Medical Panel PC Î Enabled DEFAULT The onboard High Definition Audio controller automatically detected and enabled Azalia Internal HDMI Codec [Enabled] Use the Azalia Internal HDMI Codec option to enable or disable internal HDMI codec for audio controller. Î Disabled Î Enabled The internal HDMI codec is disabled DEFAULT The internal HDMI codec is enabled BT Function [Enabled] Use the BT Function option to enable or disable the Bluetooth function.
PAGE 84
IBS-19A Series Medical Panel PC 6.5 Boot Use the Boot menu (BIOS Menu 15) to configure system boot options. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
PAGE 85
IBS-19A Series Medical Panel PC Quiet Boot [Enabled] Use the Quiet Boot BIOS option to select the screen display when the system boots. Î Disabled Î Enabled Normal POST messages displayed DEFAULT OEM Logo displayed instead of POST messages Launch PXE OpROM [Disabled] Use the Launch PXE OpROM BIOS option to enable or disable Boot Option for Legacy Network Devices. Î Î Disabled Î Enabled DEFAULT Disables Boot Option for Legacy Network Devices.
PAGE 86
IBS-19A Series Medical Panel PC 6.6 Security Use the Security menu (BIOS Menu 16) to set system and user passwords. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Password Description If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup If ONLY the User’s password is set, then this is a power on password and must be entered to boot or enter Setup.
PAGE 87
IBS-19A Series Medical Panel PC 6.7 Exit Use the Exit menu (BIOS Menu 17) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Save Changes and Reset Discard Changes and Reset Reset the system after saving the changes.
PAGE 88
IBS-19A Series Medical Panel PC Restore User Defaults Use the Restore User Defaults option to restore the user defaults to all the setup options.
PAGE 89
IBS-19A Series Medical Panel PC Chapter 7 7 Software Drivers Page 89
PAGE 90
IBS-19A Series Medical Panel PC 7.1 Available Software Drivers NOTE: The content of the CD may vary throughout the life cycle of the product and is subject to change without prior notice. Visit the PACSmate website or contact technical support for the latest updates.
PAGE 91
IBS-19A Series Medical Panel PC Step 2: The driver main menu appears (Figure 7-1). Figure 7-1: Driver CD Menu Step 3: Install all of the necessary drivers in this menu. Step0: 7.3 Chipset Driver Installation To install the chipset driver, please do the following. Step 1: Access the driver list from the driver CD. Step 2: Click Chipset and locate the install icon “infinst_autol_9.3.0.1019.exe”. Double click the install icon. Step 3: The setup files are extracted as shown in Figure 7-2.
PAGE 92
IBS-19A Series Medical Panel PC Figure 7-2: Chipset Driver File Extraction Screen Step 4: When the setup files are completely extracted the Welcome Screen in Figure 7-3 appears. Step 5: Click NEXT to continue.
PAGE 93
IBS-19A Series Medical Panel PC Step 6: The license agreement in Figure 7-4 appears. Step 7: Read the License Agreement and click YES to continue. Figure 7-4: Chipset Driver License Agreement Step 8: The Readme File Information screen in Figure 7-5 appears. Step 9: Click NEXT to continue.
PAGE 94
IBS-19A Series Medical Panel PC Figure 7-5: Readme File Information Screen Step 10: Setup operations are performed as shown in Figure 7-6. Step 11: Once the setup operations are complete, click NEXT to continue. Figure 7-6: Setup Progress Screen Step 12: The Setup Is Complete screen appears.
PAGE 95
IBS-19A Series Medical Panel PC Step 13: Select “Yes, I want to restart the computer now” and click Finish (Figure 7-7). Figure 7-7: Chipset Driver Installation Finish Screen 7.4 VGA Driver Installation To install the VGA driver, please do the following. Step 1: Access the driver list from the driver CD Step 2: Click VGA and double click on the folder which corresponds to your operating system. Step 3: Double click on the install icon. Step 4: The VGA Readme File in Figure 7-8 appears.
PAGE 96
IBS-19A Series Medical Panel PC Figure 7-8: VGA Driver Readme File Step 6: The installation files are extracted as shown in Figure 7-9. Step 7: Click NEXT to continue. Figure 7-9: VGA Driver Setup File Extraction Screen Step 8: The Welcome Screen in Figure 7-10 appears.
PAGE 97
IBS-19A Series Medical Panel PC Step 9: Click NEXT to continue. Figure 7-10: VGA Driver Welcome Screen Step 10: The License Agreement in Figure 7-11 appears. Step 11: Click YES to accept and continue.
PAGE 98
IBS-19A Series Medical Panel PC Step 12: The Readme File in Figure 7-12 appears. Step 13: Click NEXT to continue. Figure 7-12: VGA Driver Readme File Step 14: Setup operations are performed as shown in Figure 7-13. Step 15: Once the setup operations are complete, click NEXT to continue.
PAGE 99
IBS-19A Series Medical Panel PC Step 16: The Setup Is Complete screen appears. Step 17: Select “Yes, I want to restart the computer now” and click FINISH. See Figure 7-14. Figure 7-14: VGA Driver Setup Is Complete Screen 7.5 Audio Driver Installation To install the Realtek High Definition (HD) Audio driver, please follow the steps below. 7.5.1 BIOS Setup Step 1: Enter the BIOS setup. To do this, reboot the system and press F2 during POST. Step 2: Go to the Southbridge Configuration menu.
PAGE 100
IBS-19A Series Medical Panel PC Step 2: Click Audio then double click on the folder which corresponds to your operating system. Step 3: Locate the install icon and double click on it. Step 4: The InstallShield Wizard starts (Figure 7-15). Figure 7-15: The InstallShield Wizard Starts Step 5: The InstallShield Wizard is prepared to guide the user through the rest of the process (Figure 7-16).
PAGE 101
IBS-19A Series Medical Panel PC Figure 7-17: InstallShield Wizard Welcome Screen Step 8: InstallShield starts to install the new software as shown in Figure 7-18. Figure 7-18: Audio Driver Progress Screen Step 9: The Installation Wizard updates the system as shown in Figure 7-19.
PAGE 102
IBS-19A Series Medical Panel PC Figure 7-19: Installation Wizard Updates the System Step 10: After the driver installation process is complete, a confirmation screen appears (Figure 7-20). Step 11: The confirmation screen offers the option of restarting the computer now or later. For the settings to take effect, the computer must be restarted. Step 12: Click FINISH to restart the computer.
PAGE 103
IBS-19A Series Medical Panel PC 7.6 LAN Driver Installation To install the LAN driver, please do the following. Step 1: Access the driver list from the driver CD Step 2: Click LAN and double click on the folder which corresponds to your operating system. Step 3: Locate the installation icon setup.exe and double click on it. Step 4: The Welcome screen in Figure 7-21 appears. Step 5: Click NEXT to continue. Figure 7-21: LAN Driver Welcome Screen Step 6: The Ready to Install screen in Figure 7-22 appears.
PAGE 104
IBS-19A Series Medical Panel PC Figure 7-22: LAN Driver Welcome Screen Step 8: The program begins to install. Step 9: The installation progress can be monitored in the progress bar shown in Figure 7-23.
PAGE 105
IBS-19A Series Medical Panel PC Step 10: When the driver installation is complete, the screen in Figure 7-24 appears. Step 11: Click FINISH to exit setup. Figure 7-24: LAN Driver Installation Complete 7.7 Touch Screen Driver To install the touch panel software driver, please follow the steps below. Step 1: Access the driver list from the driver CD Step 2: Click Touch and double click on the folder which corresponds to your operating system.. Step 3: Locate the installation icon setup.exe.
PAGE 106
IBS-19A Series Medical Panel PC Figure 7-25: PenMount Welcome Screen Step 6: The License Agreement shown in Figure 7-26 appears. Step 7: Click I AGREE to accept and continue.
PAGE 107
IBS-19A Series Medical Panel PC Step 8: Browse for an install location or use the one suggested then click INSTALL to continue (Figure 7-27). Figure 7-27: Choose Install Location Step 9: The Install screen appears and displays the progress of the installation (Figure 7-28). Click NEXT to continue. Figure 7-28: Installing PenMount Universal Driver V2.1.0.
PAGE 108
IBS-19A Series Medical Panel PC Step 10: When the installation is complete, click FINISH to exit setup (Figure 7-29). Figure 7-29: PenMount Universal Driver Update Complete 7.8 Wireless Driver To install the wireless driver, please follow the steps below. Step 1: Open Windows Control Panel (Figure 7-30).
PAGE 109
IBS-19A Series Medical Panel PC Figure 7-30: Windows Control Panel Step 2: Double-click the System icon (Figure 7-31). Figure 7-31: System Icon Step 3: Click the Device Manager tab (Figure 7-32).
PAGE 110
IBS-19A Series Medical Panel PC Figure 7-32: Device Manager Tab Step 4: A list of system hardware devices appears (Figure 7-33).
PAGE 111
IBS-19A Series Medical Panel PC Figure 7-33: Device Manager List Step 5: Double-click the listed device that has question marks next to it (this means Windows does not recognize the device). Step 6: The Device Driver Wizard appears (Figure 7-34).
PAGE 112
IBS-19A Series Medical Panel PC Figure 7-34: Search for Suitable Driver Step 7: Select “Search for a suitable driver for my device (recommended),” and click NEXT to continue. Step 8: Select “Specify a Location” in the Locate Driver Files window (Figure 7-35). Figure 7-35: Locate Driver Files Step 9: Click NEXT to continue.
PAGE 113
IBS-19A Series Medical Panel PC Step 10: The Locate File window appears. Select the proper OS folder under the “X:\6-Wireless” directory in the Locate File window, where “X:\” is the system CD drive. Step 11: Click OPEN and the driver is installed. 7.9 Bluetooth Driver To install the Bluetooth driver, please follow the steps below. Step 1: Access the driver list from the driver CD .Click Bluetooth. Step 2: Double-click the setup icon to start the installation wizard.
PAGE 114
IBS-19A Series Medical Panel PC Figure 7-37: Bluetooth InstallShield Wizard Step 7: Click NEXT to continue (Figure 7-37). Step 8: The Bluesoleil End User License Agreement appears (Figure 7-38).
PAGE 115
IBS-19A Series Medical Panel PC Step 9: Read the license agreement. To continue the installation choose, “I accept the terms in the license agreement” then click NEXT. Step 10: The custom settings screen appears (Figure 7-39). Figure 7-39: Custom Settings Step 11: Select the shortcuts that the installation program should install (Figure 7-39). Step 12: Click NEXT to continue (Figure 7-39). Step 13: The destination folder selection window appears (Figure 7-40).
PAGE 116
IBS-19A Series Medical Panel PC Figure 7-40: USB 2.0 InstallShield Wizard Welcome Screen Step 14: Set the installation directory (default recommended) (Figure 7-40). Step 15: Click NEXT to continue the installation. Step 16: The Ready to Install Program window appears (Figure 7-41).
PAGE 117
IBS-19A Series Medical Panel PC Step 17: Click INSTALL to begin installing the Bluetooth driver (Figure 7-41). Step 18: The installation process continues without user prompts. When complete the window below appears (Figure 7-42). Figure 7-42: Bluetooth Driver Installed Step 19: Click FINISH to close the InstallShield wizard (Figure 7-42).
PAGE 118
IBS-19A Series Medical Panel PC Appendix A A Safety Precautions Page 118
PAGE 119
IBS-19A Series Medical Panel PC WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the IBS-19A Series. A.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: A.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times. Follow the electrostatic precautions outlined below whenever the system is opened.
PAGE 120
IBS-19A Series Medical Panel PC The unit is for exclusive interconnection with IEC 60XXX certified equipment outside of patient environment and IEC 60601-1 certified equipment inside the patient environment. This device complies with EN60601-1-2. To minimize the interference from other equipment, a minimum 0.5 m distance shall be kept from other potential electromagnetic sources, such as cell phones, etc.
PAGE 121
IBS-19A Series Medical Panel PC A.1.3 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the system may result in permanent damage to the system and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the system. Dry climates are especially susceptible to ESD.
PAGE 122
IBS-19A Series Medical Panel PC EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your display products, please follow the guidance of your local authority, or ask the shop where you purchased the product.
PAGE 123
IBS-19A Series Medical Panel PC Cloth – Although paper towels or tissues can be used, a soft, clean piece of cloth is recommended when cleaning the system. Vacuum cleaner – Using a vacuum specifically designed for computers is one of the best methods of cleaning the system. Dust and dirt can restrict the airflow in the system and cause its circuitry to corrode. A.
PAGE 124
IBS-19A Series Medical Panel PC IMPORTANT NOTE: For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 125
IBS-19A Series Medical Panel PC Appendix B B BIOS Options Page 125
PAGE 126
IBS-19A Series Medical Panel PC B.1 BIOS Configuration Options Below is a list of BIOS configuration options described in Chapter 6. System Overview .................................................................................................................67 System Date [xx/xx/xx] ........................................................................................................67 System Time [xx:xx:xx] ............................................................................................
PAGE 127
IBS-19A Series Medical Panel PC HDD Security Configuration ...............................................................................................86 Save Changes and Reset ....................................................................................................87 Discard Changes and Reset ...............................................................................................87 Restore Defaults ........................................................................................
PAGE 128
IBS-19A Series Medical Panel PC Appendix C C Watchdog Timer Page 128
PAGE 129
IBS-19A Series Medical Panel PC NOTE: The following discussion applies to DOS environment. PACSmate support is contacted or the PACSmate website visited for specific drivers for more sophisticated operating systems, e.g., Windows and Linux. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMI or a software bug.
PAGE 130
IBS-19A Series Medical Panel PC NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets.
PAGE 131
IBS-19A Series Medical Panel PC Page 131
PAGE 132
IBS-19A Series Medical Panel PC Appendix D D LED Light Bar Page 132
PAGE 133
IBS-19A Series Medical Panel PC D.1 Overview To notify field staffs in an efficient way to increase productivity, the IBS-19A Series integrates LED dash light system on the side frame. With the provided API software and LED simulator software, users can customize their notification according to their needs through a quick and easy user interface. The customized functions include light scripts, programmable colors, light duration, flash rates and light patterns. D.2 Software Installation D.2.
PAGE 134
IBS-19A Series Medical Panel PC Figure D-2: Welcome Screen Step 5: Click Next to continue. Step 6: The Ready to Install screen in Figure D-3 appears. Step 7: Click Install to proceed with the installation. Figure D-3: Ready to Install Step 8: The program begins to install.
PAGE 135
IBS-19A Series Medical Panel PC Step 9: The installation progress can be monitored in the progress bar shown in Figure D-4. Figure D-4: Installation Step 10: When the driver installation is complete, the screen in Figure D-5 appears. Figure D-5: Installation Complete Step 11: Click Finish to complete the installation.
PAGE 136
IBS-19A Series Medical Panel PC D.2.2 IEI LED Light Bar Display Simulator Installation To install the IEI LED Light Bar Display Simulator, please follow the steps below. Step 1: Insert the driver CD. Step 2: Locate the IBS-19A_x.x.x.xx.msi file in the driver CD. Double click the setup file to start the installation. The user can also download the latest setup file from IEI website. Step 3: The LED Light Bar Display Simulator Wizard welcome window appears. Click Next to start.
PAGE 137
IBS-19A Series Medical Panel PC Figure D-7: Select Installation Folder Step 5: The following screen appears. Click Next to confirm the installation. Figure D-8: Confirm Installation Step 6: The system starts installing the LED Light Bar Display Simulator.
PAGE 138
IBS-19A Series Medical Panel PC Figure D-9: Confirm Installation Step 7: When the LED Light Bar Display Simulator is successfully installed, the following window appears. Click Close to exit.
PAGE 139
IBS-19A Series Medical Panel PC D.3 IEI LED Light Bar Display Simulator To configure the LED light bars using IEI LED Light Bar Display Simulator, please follow the steps below: Step 1: Make sure LED Bar driver is properly installed. See Section D.2.1. Step 2: Double click the IBS-19A LED Simulator icon on the desktop to launch the IEI LED Light Bar Display Simulator. Step 3: The simulator interface is shown in Figure D-11.
PAGE 140
IBS-19A Series Medical Panel PC Function Description New Clear all current commands Load Load the configuration file ( *.cld ) Save Save all current commands in a .cld file Run/Stop Run: Start to simulate the LED display Stop: Stop the simulation Add Add a new command below the selected command Insert Insert a new command above the selected command Copy Copy the selected command and create a new command on the next line.
PAGE 141
IBS-19A Series Medical Panel PC Step 5: Or double click the user defined color button to open the color palette and select a desired color. Figure D-14: Color Palette Step 6: After selecting a color, click a LED simulation number. The color of the selected LED on the software will change automatically (Figure D-15), so as the IBS-19A Series light bar.
PAGE 142
IBS-19A Series Medical Panel PC Step 7: To set all the left LED light bar to a certain color, click the “LEFT" button. Click RIGHT for the right bar and click TOP for the top bar. Figure D-16: Set the Left LEDs Step 8: To set all the LED light to a certain color, click the “ALL" button.
PAGE 143
IBS-19A Series Medical Panel PC Figure D-17: Set All the LEDs Step 9: Configure the light duration by entering a number between 1 and 20 (unit in second) in the field shown in Figure D-18.
PAGE 144
IBS-19A Series Medical Panel PC Step 10: Press the Add button to insert a new command line below the selected command or press Insert to insert a new command line above the selected command. Follow the instruction described in Step 3 ~ Step 8 to set a new command. NOTE: Use the up and down buttons on the scroll bar or the scroll wheel on the mouse to select between the commands. Figure D-19: Add new command Step 11: Press the Loop Start button to set loop start point in a new command line.
PAGE 145
IBS-19A Series Medical Panel PC Figure D-20: Add Loop Start Step 12: Press the Loop End button to set loop end point. Figure D-21: Add Loop End Step 13: Press the Run button to simulate. Press Stop to stop the simulation.
PAGE 146
IBS-19A Series Medical Panel PC D.4 LED Control API This section describes how to use the LED Control API to control the LED dash light of the IBS-19A Series. D.4.1 Supported Operating System The LED Control API can be used in the following operating system: Windows 200 Windows XP (x86) Windows 2003 Windows 7 (x86) D.4.
PAGE 147
IBS-19A Series Medical Panel PC Return value: Remarks: This function can return a handle of a device. Call this function to initialize the LED driver and return a handle from the LED driver. D.5.2 LIGHTBAR_DriverUninit Syntax: PACSM_LIGHTBAR_CTRL STD_Void LIGHTBAR_DriverUninit(HANDLE hDev) Parameters: hDev [IN] – a handle to be released Return If it is initialized successfully, it returns TRUE.
PAGE 148
IBS-19A Series Medical Panel PC D.5.5 LIGHTBAR_Brightness_Single Syntax: PACSM_LIGHTBAR_CTRL STD_BOOLEN LIGHTBAR_Brightness_Single( HANDLE hDev, PLED_COLOR_INFO Brightness_Step, int INFO_Size) Parameters: hDev [IN] – input handle Brightness_Step [IN] – point to structures buffers to write (see Section D.6.1 _LED_COLOR_INFO for details)。 INFO_Size [IN] – size of structures Remarks: Write data to LED IC on I2C bus via drivers.
PAGE 149
IBS-19A Series Medical Panel PC _LED_BLNK_TYPE for details) Return value: Remarks: If it is initialized successfully, it returns TRUE. Call this function to turn on/off LED IC blinking control via drivers. D.5.8 LIGHTBAR_LED_ModeSet Syntax: PACSM_LIGHTBAR_CTRL STD_BOOLEN LIGHTBAR_LED_ModeSet ( HANDLE hDev, PLED_MODE_SETTINGS LED_Mode_Settings) Parameters: hDev [IN] - Input Handle. LED_Mode_Settings [IN] - Point to structures buffers to write. (Section D.6.
PAGE 150
IBS-19A Series Medical Panel PC UCHAR G_LN; //Green list number UCHAR B_LN; //Blue list number } LED_INFO, *PLED_INFO; Remarks: The structure includes essential information to set LED IC. D.6.2 _LED_BLNK_SET Syntax: typedef struct _LED_BLNK_SET{ UCHAR Main_Addr; //Main address BYTE BLNK_DutCyc; //Duty Cycle BYTE BLNK_Freq; //Blinking Frequency }LED_BLNK_SET, *PLED_BLNK_SET; Parameters: Main_Addr [UCHAR] – IC address on I2C bus. BLNK_DutCyc [BYTE] – Duty cycle of LED blinking.
PAGE 151
IBS-19A Series Medical Panel PC D.6.4 _LED_MODE_SETTINGS Syntax: typedef struct _LED_MODE_SETTINGS{ UCHAR Main_Addr; //Main address int LED_00; int LED_01; int LED_02; int LED_03; int LED_04; int LED_05; int LED_06; int LED_07; int LED_08; int LED_09; int LED_10; int LED_11; int LED_12; int LED_13; int LED_14; }LED_MODE_SETTINGS, *PLED_MODE_SETTINGS; Parameters: Main_Addr [UCHAR] – IC address on I2C bus.
PAGE 152
IBS-19A Series Medical Panel PC D.7 Programming Example Some example programs are provided below. Please modify it by the language you use. D.7.1 Turn on LED - single { //Define Data structure PLED_PWM_INFO LEDCOLOR = (PLED_PWM_INFO)malloc(sizeof(LED_PWM_INFO)); HANDLE hSMB_Dev = LIGHTBAR_DriverInit();//Init SMBAPI driver and get device Handle. LIGHTBAR_DeviceInit(hSMB_Dev);//Init Target device //Set LED level information. LEDCOLOR.R_LEVEL = 7; LEDCOLOR.G_LEVEL = 7; LEDCOLOR.
PAGE 153
IBS-19A Series Medical Panel PC HANDLE hSMB_Dev = LIGHTBAR_DriverInit();//Init SMBAPI driver and get device Handle. LIGHTBAR_DeviceInit(hSMB_Dev);//Init Target device LEDCOLOR [0].LED_Info.Main_Addr = 0xD0; LEDCOLOR [0].LED_Info.R_LN = 0x02; LEDCOLOR [0].LED_Info.G_LN = 0x03; LEDCOLOR [0].LED_Info.B_LN = 0x04; LEDCOLOR [0].R_LEVEL = 7; LEDCOLOR [0].G_LEVEL = 7; LEDCOLOR [0].B_LEVEL = 7; LEDCOLOR [1].LED_Info.Main_Addr = 0xD0; LEDCOLOR [1].LED_Info.R_LN = 0x05; LEDCOLOR [1].LED_Info.
PAGE 154
IBS-19A Series Medical Panel PC LEDCOLOR [4].LED_Info.B_LN = 0x10; LEDCOLOR [4].R_LEVEL = 7; LEDCOLOR [4].G_LEVEL = 7; LEDCOLOR [4].B_LEVEL = 7; If(LIGHTBAR_Brightness_Single(hSMB_Dev, LEDCOLOR, 5) == False){ //Error message } LIGHTBAR_DeviceClose(hSMB_Dev); //Close Device. LIGHTBAR_DriverUninit(hSMB_Dev); //Close Driver Handle delete LEDCOLOR; } D.7.
PAGE 155
IBS-19A Series Medical Panel PC LED_ModeSet.LED_04 = LED_DispMode_BLNK; //G LED_ModeSet.LED_05 = LED_DispMode_BLNK; //B LED_ModeSet.LED_06 = LED_DispMode_BLNK; //R LED_ModeSet.LED_07 = LED_DispMode_BLNK; //G LED_ModeSet.LED_08 = LED_DispMode_BLNK; //B LED_ModeSet.LED_09 = LED_DispMode_BLNK; //R LED_ModeSet.LED_10 = LED_DispMode_BLNK; //G LED_ModeSet.LED_11 = LED_DispMode_BLNK; //B LED_ModeSet.LED_12 = LED_DispMode_BLNK; //R LED_ModeSet.LED_13 = LED_DispMode_BLNK; //G LED_ModeSet.
PAGE 156
IBS-19A Series Medical Panel PC //Set Structure: Set each LED operation mode. LED_ModeSet.LED_00 = LED_DispMode_Gen; //R LED_ModeSet.LED_01 = LED_DispMode_Gen; //G LED_ModeSet.LED_02 = LED_DispMode_Gen; //B LED_ModeSet.LED_03 = LED_DispMode_BLNK; //R LED_ModeSet.LED_04 = LED_DispMode_BLNK; //G LED_ModeSet.LED_05 = LED_DispMode_BLNK; //B LED_ModeSet.LED_06 = LED_DispMode_Gen; //R LED_ModeSet.LED_07 = LED_DispMode_Gen; //G LED_ModeSet.LED_08 = LED_DispMode_Gen; //B LED_ModeSet.
PAGE 157
IBS-19A Series Medical Panel PC Appendix E E Second Audio Output/ Input Configuration Page 26
PAGE 158
IBS-19A Series Medical Panel PC E.1 Overview An optional handset can be installed on the IBS-19A Series as a second audio output/input device. The Realtek HD Audio controller of the IBS-19A Series allows the system to play audio through two different audio devices (speakers or handset) simultaneously or to record audio either from the front panel microphone or from the handset. This appendix describes how to configure the second audio input/output device in Windows 7 and Windows XP environment. E.
PAGE 159
IBS-19A Series Medical Panel PC Figure E-2: Realtek HD Audio Manager (Windows 7) Step 4: The Device advanced settings window appears (Figure E-3). Modify the option to: Make front and rear output devices playback two different audio streams simultaneously. Separate all input jacks as independent input devices. Step 5: Click OK to save the settings and exit the window.
PAGE 160
IBS-19A Series Medical Panel PC Figure E-3: Device Advanced Settings - Realtek HD Audio Manager (Windows 7) Step 6: Click the HD Audio 2nd output tab. Check if the main volume setting is set in the middle of L and R. If audio signal is set to play out of LEFT channel only, there will be no sound coming from the handset. See Figure E-4.
PAGE 161
IBS-19A Series Medical Panel PC Step 7: To set the front panel speakers as the default audio output device, click “Speakers” and click the “Set Default Device” dropdown menu. Select “Set Default Device”. See Figure E-5. Figure E-5: Set Default Device - Speakers (Windows 7) Step 8: To set the handset as the default audio output device, click HD Audio 2nd output and click the Set Default Device dropdown menu. Select “Set Default Device”.
PAGE 162
IBS-19A Series Medical Panel PC Step 9: To set the handset as the default audio input device, click “Mic in at rear panel” and click the Set Default Device dropdown menu. Select “Set Default Device”. Figure E-7: Set Default Device – Mic in at Rear Panel (Windows 7) Step 10: To set the microphone on the front panel as the default audio input device, click “FrontMic” and click the Set Default Device dropdown menu. Select “Set Default Device”. See Figure E-8.
PAGE 163
IBS-19A Series Medical Panel PC Step 11: Click OK to save the settings and exit the Realtek HD Audio Manager. E.2.2 Windows XP OS To configure the Realtek HD Audio Manger in a Windows XP OS, follow the steps below. Step 1: Make sure the Realtek high definition audio driver has been installed on the system. If the audio driver has not been installed on the system, please refer to Section 7.5. 8 Step 2: Launch the Realtek HD Audio Manager.
PAGE 164
IBS-19A Series Medical Panel PC Step 4: Click the Mixer tab. Step 5: Click the Mixer ToolBox icon in the Playback section (Figure E-11) Figure E-11: Mixer Screen Step 6: The following screen appears (Figure E-12). Check the Enable playback multi-streaming box and click OK.
PAGE 165
IBS-19A Series Medical Panel PC Step 7: Select an output device from the dropdown menu in the Playback section (Figure E-13). The audio output device selected here will be set as the default 8 audio output device of the system. Realtek HDA Primary output: audio playback through the front panel speakers. Realtek HDA Audio 2nd output: audio playback through the handset.
PAGE 166
IBS-19A Series Medical Panel PC Figure E-14: Mixer Screen Step 9: The following screen appears (Figure E-15). Check the Enable recording 8 multi-streaming box and click OK.
PAGE 167
IBS-19A Series Medical Panel PC Step 10: To enhance the clarity and volume level of the microphone, click the small icon below the Mic Volume control bar to bring up the Advanced setting window (Figureٛ E-16). Check “Microphone Boost” and click OK. Figureٛ E-16: Microphone Boost Step 11: Select an input device from the dropdown menu in the Record section (Figure E-17). The audio input device selected here will be set as the default audio input device of the system.
PAGE 168
IBS-19A Series Medical Panel PC Figure E-17: Audio Input Selection Step 12: Click the Microphone tab. Select an input option from the dropdown menu. The input option selected here must be the same one selected in Step 11.
PAGE 169
IBS-19A Series Medical Panel PC E.3 Audio Playback This section describes how to configure the system to play audio through the front panel speakers and the handset simultaneously. The preinstalled Windows Media Player and the Media Player Classic freeware are taken as examples for the instruction. Users can use other media players to apply the same technique to play two different audio streams. Step 1: Follow the instruction describe in Section E.
PAGE 170
IBS-19A Series Medical Panel PC Figure E-20: Media Player Classic - Audio Step 4: The Options window appears. Select Playback: Output. Click the DirectShow Audio dropdown menu. Select an audio output device for the Media Player Classic to play through.
PAGE 171
IBS-19A Series Medical Panel PC Step 5: Click OK to exit the Options window. Close the Media Player Classic to apply the new settings. Step 6: Launch the Media Player Classic again. Select an audio file for Media Player Classic to play. The audio will play through the selected audio output device. E.4 VoIP Usage - Skype This section describes how to configure the audio settings in VoIP software. Skype is taken as an example for the instruction. Step 1: Login Skype. Step 2: Select Tools Æ Options.
PAGE 172
IBS-19A Series Medical Panel PC Figure E-23: Skype – Audio Settings Step 4: Click the microphone dropdown menu to select an audio input device. FrontMic (Realtek High Definition Audio): microphone on the front panel. Mic in at rear panel (Pink) (Realtek High Definition A..
PAGE 173
IBS-19A Series Medical Panel PC Step 5: Click the speaker dropdown menu to select an audio output device. Speakers (Realtek High Definition Audio): speakers on the front panel. Realtek HD Audio 2nd output (Realtek High Definitio..: handset Figure E-25: Skype –Audio Settings (Speakers) Step 6: Click Save to save the settings and exit the Options window.
PAGE 174
IBS-19A Series Medical Panel PC Appendix F F Hazardous Materials Disclosure Page 43
PAGE 175
IBS-19A Series Medical Panel PC F.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
PAGE 176
IBS-19A Series Medical Panel PC Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl Ethers (CR(VI)) (PBB) (PBDE) Housing X O O O O X Display X O O O O X Printed Circuit X O O O O X Metal Fasteners X O O O O O Cable Assembly X O O O O X Fan Assembly X O O O O X Power Supply X O O O O X O O O O O O Board Assemblies Battery O: This t
PAGE 177
IBS-19A Series Medical Panel PC 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元件将会单独标示出来。部件名称有毒有害物质或元素铅汞镉六价铬多溴联苯多溴二苯醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 X O O O O X 显示 X O O O O X 印刷电路板 X O O O O X 金属螺帽 X O O O O O 电缆组装 X O O O O X 风扇组装 X O O O O X 电力供应组装 X O O O O X 电池 O O O O O O O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规