Manual

HDC-502E SDK (Windows)
Page 13
Step 5: In the Command Prompt window, specify the 64-bit driver directory. Then, type
DriverInstaller.bat to start the driver installation.
Figure 1-8: Command Prompt – Driver Installation
Step 6: Follow Step 5 ~ Step 8 in Section
1.2 to complete installing the driver to a 64-bit
Windows 7 operating system.
Step 7: Check the device manager in the Windows control panel to ensure the driver
(MB86H55-REB PCI, DEVICE and WinDriver) has been properly installed. See
Figure 1-9 for the details.