Owner manual

HDC-502E SDK (Linux)
Page 8
Step 5: Enter the password:
password: ******
$
Step 6: Install the HDCapture SDK by typing:
# ./install.sh
Step 7: The system starts to install the HDCapture SDK and shows:
Installation start.
Making fmb_player_apl...done.
Installing fmb_player_apl...done.
Installing firm...done.
Making fmb_driver...done.
Making mmux_driver...done.
Unloading old MB86H55 device driver...done.
Loading new MB86H55 device driver...done.
Unloading old media_mux device driver...done.
Loading new media_mux device driver...done.
Installation completed.
#
Step 8: Type “exit” to logout from root: Step 0:
# exit
1.4 Launch HDCapture SDK
Step 1: To launch the HDCapture SDK, type “hdcapture” as below:
$ hdcapture
Step 2: The system starts to launch the HDCapture SDK. When the main menu appears,
it is ready to use. Step 0:
[dev-0] Boot ...
[dev-1] Boot ...
________________________________________________________