Owner manual

HDC-502E SDK (Linux)
Page 10
Step 2: Type 6 to select “6 Encode settings” from the main menu.
fmb-0?>6
Step 3: The following message shows.
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
< Device list >
Select following number.
1 /dev/h55fmb0
2 /dev/h55fmb1
fmb-0?>
Step 4: Select a port to configure by entering the port number. For example, type 1 to
select the first port.
fmb-0?>1
Step 5: The following message shows.
< Encode settings - Sub menu >
“Z”<-~~~~~~~~
Select following number. (Current settings)
1 Output port setting (File ./stream-0.mpg)
2 Video resolution setting (1920x1080_60p)
3 Video bitrate setting (CBR, 6000kbps)
4 Audio format (MPEG1L2, 256kbps)
fmb-0?>