Owner manual

HDC-3x Series Video Capture Card
Page 45
Figure 4-8: Select Transmitter Device for HDC-302E
Step 5: This step is only required for the HDC-304E. Select the transmitter bus from 0
to 3 (
Figure 4-9). For example, to view the video input source 1 on HDMI display
device, select the transmitter bus 0. Please refer to the following table:
Video Input Source Transmitter Bus
Source 1 0
Source 2 1
Source 3 2
Source 4 3
Figure 4-9: Select Transmitter Device for HDC-304E