User Manual

HDC-3x Series SDK (Windows)
Page 22
2.1 HDCapture SDK Overview
The HDCapture SDK is a video capture tool that allows user to capture video through the
HDMI input ports in Windows environment. The HDCapture SDK also includes decoding
function that decodes the video signal for video output to the HDMI-enabled display
device.
2.2 Video Ca pture
To use the HDCapture SDK to capture video, follow th e steps below. If the older v ersion of
the HDCapture SDK is already installed, please refer to Section
1.3.3 to uninstall it.
Step 1: Launch the HDCapture SDK. The Device Setting on the right side panel of the
HDCapture SDK is varied based on the inst all ed vide o captu re card as shown in
Figure 2-1. The best resolution to view HDCapture SDK is 1280 x 1024 or
above.
HDC-301 and HDC-301E