Manual
HDC-3x Series SDK (Linux)
Page 19
The contents marked in blue are especially for the HDC-302E and the HDC-304E
video capture cards.
Step 3: After selecting the port(s), type y.
fmb-0?>y
Step 4: The current settings of the selected port shows as following.
[[[ Encoding - confirm -> Encoding ]]]
āZā<-~~~~~~~->Enter
Current settings
Stream output File ./stream-0.mpg
Video format 1920x1080
Video framerate 59.94p
Video rate control CBR
Video bitrate 6000kbps
Audio format MPEG1L2
Audio bitrate 256kbps
Scale Format Not Use
Press <Enter> key to start encoding.
fmb-0?>
Step 5: Press Enter. The system shows the following message and starts capturing
video.
[[[ Encoding ]]]
Press <Enter> key to stop.
fmb-0?>
Step 6: Press Enter again to stop capturing video. Step 0: