Manual

HDC-3x Series SDK (Linux)
Page 12
fmb-0?>
Step 4: Select a port to configure by entering the port number. For example, type 1 to
select the first port.
fmb-0?>1
Step 5: The following message shows.
< Encode settings - Sub menu >
‘Z’<-~~~~~~~~
Select following number. (Current settings)
1 Output port setting (File ./stream-0.mpg)
2 Video resolution setting (1920x1080_59.94p)
3 Video bitrate setting (CBR, 6000kbps)
4 Audio format (MPEG1L2, 256kbps)
5 Video scale (Not Use)
fmb-0?>
NOTE:
The user can enter Z at anytime to go back to the previous page.
Step 6: Configure the file name of the encoded file. To configure the file name, type 1
to select the “Output port setting”.
fmb-0?>1
Step 7: The following message shows.
[[[ Encode settings - Sub menu -> Output port ]]]
‘Z’<-~~~~~~~~~~~->Enter
Select following number. (* is current setting)
1 * File
fmb-0?>
Step 8: Type 1 to select “File”.