User guide

EP-308A/EP-308AS POS
Page 9
WARNING!
Only remove the protective plastic cover stuck to the front screen after
installation. The plastic layer protects the monitor surface during
installation process.
Step 1: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 2: Open the outside box.
Step 3: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 4: Open the inside box.
Step 5: Lift the monitor out of the boxes.
Step 6: Remove the peripheral parts box from the main box. Step 0:
2.2 Packing List
The EP-308A/EP-308AS flat panel PC is shipped with the following components:
Quantity Item Image
1 EP-308A/EP-308AS
1 Power adapter (70 W)
1 AC power cable
1 Touch screen pen