Manual
Table Of Contents
- 1 Introduction
- 2 Detailed Specifications
- 3 Unpacking
- 4 Connectors
- 4.1 Peripheral Interface Connectors
- 4.2 Internal Peripheral Connectors
- 4.2.1 BIOS Battery Connector
- 4.2.2 CompactFlash® Socket
- 4.2.3 Digital I/O Connector
- 4.2.4 Fan Connector
- 4.2.5 Front Panel Connector
- 4.2.6 IDE Connector
- 4.2.7 Infrared Interface Connector
- 4.2.8 Keyboard/Mouse Connector
- 4.2.9 LCD Backlight Inverter Connector
- 4.2.10 LED Connector
- 4.2.11 LVDS LCD Connector
- 4.2.12 MCU LAN Connector
- 4.2.13 PCIe Mini Card Slot
- 4.2.14 Power Connectors
- 4.2.15 SATA Drive Connectors
- 4.2.16 SATA Power Connectors
- 4.2.17 Serial Port Connectors (RS-232)
- 4.2.18 Serial Port Connectors (RS-422/485)
- 4.2.19 SO-DIMM Socket
- 4.2.20 SPDIF Connector
- 4.2.21 TV Out Connector
- 4.2.22 USB Connectors
- 4.3 External Peripheral Interface Connector Panel
- 5 Installation
- 6 BIOS Setup
- 7 Software Installation
- 8 Battery Monitoring
- A BIOS Options
- B Terminology
- C Digital I/O Interface
- D Watchdog Timer
- E Address Mapping
- F Hazardous Materials Disclosure
eKINO-945GSE Motherboard
Page 6
Specification eKINO-945GSE
Watchdog Timer
Software programmable 1-255 sec. through the iTE IT8718F
super I/O
Infrared
One infrared connector supports
Serial Infrared (SIR)
Amplitude Shift Keyed IR (ASKIR)
Power Supply
Recommended input voltage: 12-24 VDC
Maximum input voltage: 9-28 VDC
1 x External 4-pin DIN jack
1 x Internal 2x2 power connector
Power Consumption
1 A @ 12 V (with 1.0 GB DDR2 memory)
Temperature
With AUPS: 0ºC – 40ºC (32ºF – 104ºF)
Without AUPS: 0ºC – 60ºC (32ºF – 140ºF)
Humidity (operating)
5%~95% non-condensing
Dimensions (LxW)
170 mm x 170 mm
Weight (GW/NW)
1100 g / 370 g
Table 1-1: Technical Specifications