Manual
Table Of Contents
- 1 Introduction
- 2 Detailed Specifications
- 3 Unpacking
- 4 Connectors
- 4.1 Peripheral Interface Connectors
- 4.2 Internal Peripheral Connectors
- 4.2.1 BIOS Battery Connector
- 4.2.2 CompactFlash® Socket
- 4.2.3 Digital I/O Connector
- 4.2.4 Fan Connector
- 4.2.5 Front Panel Connector
- 4.2.6 IDE Connector
- 4.2.7 Infrared Interface Connector
- 4.2.8 Keyboard/Mouse Connector
- 4.2.9 LCD Backlight Inverter Connector
- 4.2.10 LED Connector
- 4.2.11 LVDS LCD Connector
- 4.2.12 MCU LAN Connector
- 4.2.13 PCIe Mini Card Slot
- 4.2.14 Power Connectors
- 4.2.15 SATA Drive Connectors
- 4.2.16 SATA Power Connectors
- 4.2.17 Serial Port Connectors (RS-232)
- 4.2.18 Serial Port Connectors (RS-422/485)
- 4.2.19 SO-DIMM Socket
- 4.2.20 SPDIF Connector
- 4.2.21 TV Out Connector
- 4.2.22 USB Connectors
- 4.3 External Peripheral Interface Connector Panel
- 5 Installation
- 6 BIOS Setup
- 7 Software Installation
- 8 Battery Monitoring
- A BIOS Options
- B Terminology
- C Digital I/O Interface
- D Watchdog Timer
- E Address Mapping
- F Hazardous Materials Disclosure
eKINO-945GSE Motherboard
Page 132
Î Internal Graphics Mode Select [Enable, 8 MB]
The Internal Graphic Mode Select option determines the amount of system memory that
can be used by the Internal graphics device.
Î
Disable
Î
Enable, 1 MB
1 MB of memory used by internal graphics device
Î
Enable, 8 MB DEFAULT
8 MB of memory used by internal graphics device
Î Boot Graphic Adapter Priority [PCI/IGD]
The Boot Graphic Adapter Priority setting determines the priority of the attached
graphics devices.
Î
IGD
Only the internal graphics devices are checked, these
include VGA, LVDS, TV and SDVO.
Î
PCI/IGD DEFAULT
Graphics cards connected to the PCI expansion card
slots on the backplane are checked first for graphics
cards. Next, the internal devices, mentioned above, are
checked.