Manual
Table Of Contents
- 1 Introduction
- 2 Detailed Specifications
- 3 Unpacking
- 4 Connectors
- 4.1 Peripheral Interface Connectors
- 4.2 Internal Peripheral Connectors
- 4.2.1 BIOS Battery Connector
- 4.2.2 CompactFlash® Socket
- 4.2.3 Digital I/O Connector
- 4.2.4 Fan Connector
- 4.2.5 Front Panel Connector
- 4.2.6 IDE Connector
- 4.2.7 Infrared Interface Connector
- 4.2.8 Keyboard/Mouse Connector
- 4.2.9 LCD Backlight Inverter Connector
- 4.2.10 LED Connector
- 4.2.11 LVDS LCD Connector
- 4.2.12 MCU LAN Connector
- 4.2.13 PCIe Mini Card Slot
- 4.2.14 Power Connectors
- 4.2.15 SATA Drive Connectors
- 4.2.16 SATA Power Connectors
- 4.2.17 Serial Port Connectors (RS-232)
- 4.2.18 Serial Port Connectors (RS-422/485)
- 4.2.19 SO-DIMM Socket
- 4.2.20 SPDIF Connector
- 4.2.21 TV Out Connector
- 4.2.22 USB Connectors
- 4.3 External Peripheral Interface Connector Panel
- 5 Installation
- 6 BIOS Setup
- 7 Software Installation
- 8 Battery Monitoring
- A BIOS Options
- B Terminology
- C Digital I/O Interface
- D Watchdog Timer
- E Address Mapping
- F Hazardous Materials Disclosure
eKINO-945GSE Motherboard
Page 105
10
Î Select RS232 or RS422/RS485 [RS232]
Use the Select RS232 or RS422/RS485 option to select the transmitting and receiving
mode.
RS232 Default
RS422/485
Î Serial Port4 Address [2E8]
Use the Serial Port 4 Address option to set the I/O address.
Î
Disabled
No I/O address assigned
Î
3E8
The assigned I/O address is 3E8
Î
2E8 DEFAULT
The assigned I/O address is 2E8
Î
2F0
The assigned I/O address is 2F0
Î
2E0
The assigned I/O address is 2E0
Î Serial Port 4 IRQ [10]
Use the Serial Port 4 IRQ option selects the IRQ.
11
10 Default
Î Serial Port6 Address [2E0]
Use the Serial Port 6 Address option to set the I/O address.
Î
Disabled
No I/O address assigned
Î
3E8
The assigned I/O address is 3E8
Î
2E8
The assigned I/O address is 2E8
Î
2F0
The assigned I/O address is 2F0