Manual

eKINO-945GSE Motherboard
Page 101
Î
3
PIO mode 3 selected with a maximum transfer rate of 11.1 MB/s
Î
4
PIO mode 4 selected with a maximum transfer rate of 16.6 MB/s
(This setting generally works with all hard disk drives
manufactured after 1999. For other disk drives, such as IDE
CD-ROM drives, check the specifications of the drive.)
Î DMA Mode [Auto]
Use the DMA Mode BIOS selection to adjust the DMA mode options.
Î
Auto DEFAULT
BIOS auto detects the DMA mode. Use this value if the IDE
disk drive support cannot be determined.
Î
SWDMA0
Single Word DMA mode 0 selected with a maximum data
transfer rate of 2.1 MB/s
Î
SWDMA1
Single Word DMA mode 1 selected with a maximum data
transfer rate of 4.2 MB/s
Î
SWDMA2
Single Word DMA mode 2 selected with a maximum data
transfer rate of 8.3 MB/s
Î
MWDMA0
Multi Word DMA mode 0 selected with a maximum data
transfer rate of 4.2 MB/s
Î
MWDMA1
Multi Word DMA mode 1 selected with a maximum data
transfer rate of 13.3 MB/s
Î
MWDMA2
Multi Word DMA mode 2 selected with a maximum data
transfer rate of 16.6 MB/s
Î
UDMA1
Ultra DMA mode 0 selected with a maximum data transfer
rate of 16.6 MB/s
Î
UDMA1
Ultra DMA mode 1 selected with a maximum data transfer
rate of 25 MB/s
Î
UDMA2
Ultra DMA mode 2 selected with a maximum data transfer
rate of 33.3 MB/s