Owner manual

eKINO-945GSE Motherboard
Page 34
The battery connector is connected to a backup battery. The battery connector is also
used to reset the CMOS memory if the incorrect BIOS settings have been made and the
system cannot boot up.
Figure 4-2: Battery Connector Location
Pin No. Description
1 Battery+
2 Ground
Table 4-3: Battery Connector Pinouts
4.2.2 CompactFlash® Socket
CN Label: J2
CN Type:
CompactFlash® slot
CN Location:
See
Figure 4-3
The CompactFlash® card slot allows a CompactFlash® type I or II card to be installed.